ifm electronic gmbh CR3025
I/O modules for mobile machines, ecomatRelay/1HB10A
Технические характеристики
| UV resistant | yes |
|---|---|
| Напряжение питания | 8...32 DC |
| Напряжение питания | 12 / 24 |
| Current consumption [mA] | < 25; (without motor control) |
| Power consumption [W] | 0.6; (24 V; without motor control) |
| Total number of inputs and outputs | 4 |
| Number of inputs and outputs | Number of digital inputs: 3; Number of analog inputs: 3; Number of outputs with H-bridge: 1 |
| Total number of inputs | 3 |
| Number of digital inputs | 3 |
| Number of analog inputs | 3 |
| Analog input | input range [V]: 0...32; input resistance [Ω]: 66600; Resolution: 12 Bit; Accuracy: ± 29 mV; input frequency [Hz]: < 44 |
| Digital input | input range [V]: 0...32; Switching level high [V]: > 70 % VBB30; Switching level low [V]: < 30 % VBB30; Resolution: 12 Bit; Accuracy: ± 29 mV; input frequency [Hz]: < 44; input resistance [Ω]: 66600 |
| Total number of outputs | 1 |
| Permanent current rating of switching output DC [mA] | 10000 |
| Short-time current rating of switching output [mA] | 12000; (t ≤ 5 min.) |
| Number of outputs with H-bridge | 1 |
| Output | Voltage range [V]: 8...32; switching current [A]: 0...10; output frequency [Hz]: 0...25500; pulse/pause ratio: 0...1000 ‰; protective circuitry: inductive load; thermal protection; current measurement [A]: 0...12; accuracy of the current measurement [A]: ± 3; Diagnostic functions: $Lasterkennung |
| Parameter setting options | Baud rate; CAN parameter; Direction of rotation; Frequency output; node ID; pulse/pause ratio |
| Communication interface | CAN |
| Number of CAN interfaces | 1 |
| Transmission rate | 20 kBit/s... 1 MBit/s |
| Protocol | CANopen |
| Interface | CAN Interface 2.0 A/B ISO 11898-5 |
| Factory settings | Transmission rate: 250 kBit/s; node ID: 123 |
| Housing temperature [°C] | -40...85 |
| Storage temperature [°C] | -40...85 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 3500 |
| Protection | IP 67; (when mounted) |
| Pollution degree | 2 |
| UV radiation | DIN EN ISO 4892-2 (procedure A, cycle B1, 1000 h) |
| Chemical media | ISO 16750-5: AA, BA, BD, CC, DB, DC, DD |
| EMC | DIN EN 61000-6-2 noise immunity; DIN EN 61000-6-4 noise emission; CISPR25 automotive radiated emission; ISO 11452 automotive immunity to disturbances; FCC Part 15B Class A; ISO 7637-2 pulse 1: severity level 4 / function state C (24 V); ISO 7637-2 pulse 2a: severity level 4 / function state A (24 V); ISO 7637-2 pulse 2b: severity level 4 / function state C (24 V); ISO 7637-2 pulse 3a: severity level 4 / function state A (24 V); ISO 7637-2 pulse 3b: severity level 4 / function state A (24 V); ISO 7637-2 pulse 4: severity level 4 / function state A (24 V); ISO 7637-2 pulse 5: severity level 3 / function state A (24 V); ISO 7637-2 pulse 4: severity level 4 / function state A (12 V) |
| Continuous shock resistance | ISO 16750-3: 30 g 6 ms / 24000 shocks |
| Vibration resistance | ISO 16750-3 Test VII: random, mounting place car body |
| MTTF [years] | 308 |
| Масса | 77.8 |
| Housing | rectangular |
| Type of mounting | vertical |
| Dimensions [mm] | 30 x 30 x 40 |
| Материал | Housing: PA 6.6-GF30 |
| Information on service life | max. mating cycles of the crimp contacts:: 10 |
| Processor | 8-Bit; 40 MHz |
| Working memory | 4 KByte RAM |
| Mass storage | 60 KByte Flash |
| Non-volatile memory | 2 kByte |
| Pack quantity | 1 pcs. |