ifm electronic gmbh DI605A
Compact evaluation unit for speed monitoring, DGA4005-WRKG/IO/US/3D
Категории:
Технические характеристики
| Electrical design | PNP/NPN; (configurable) |
|---|---|
| Output function | normally open / closed; (configurable) |
| Sensing range [mm] | 5 |
| Communication interface | IO-Link |
| Housing | Threaded type |
| Dimensions [mm] | M18 x 1 / L = 76 |
| Special feature | gold-plated contacts |
| Application | evaluation of rotating and linear movements with regard to underspeed; blocking |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | < 15 |
| Protection class | II |
| Reverse polarity protection | yes |
| Напряжение питания | 2.5 |
| Factory setting | Electrical design: PNP; Output function: normally open; Set point: 100 Imp/min; Output OUT2: Pulse output |
| Short-circuit protection | yes |
| Overload protection | yes |
| Output signal | pulse signal; switching signal; (configurable) |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | < 500 |
| Pulse output | external evaluation of the damping pulses |
| Measuring range [Imp/min] | 1...32000 |
| Setting range [Imp/min] | 3...24000 |
| Measuring principle | inductive |
| Correction factor | stainless steel: 0.7 / brass: 0.4 / aluminum: 0.4 / copper: 0.3 |
| Hysteresis [% of Sr] | 10 |
| Hysteresis [% of Sp] | 10...30 |
| Repeatability IO-Link [%] | 1; (of the final value of the measuring range) |
| Temperature drift | ± 10 %; (of the final value of the measuring range) |
| Start-up delay [s] | 0...30; (In steps of: 100 ms; default: 10 s) |
| Max. damping frequency [Imp/min] | 60000 |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 4.2.1: Measuring and Switching Sensor, high resolution, 1 channel; Common - I&D: Identification and Diagnosis; Function: Locator; Function: ProductURI |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 3.7 |
| IO-Link process data (cyclical) | Function: bit length; process value: 32; device status: 4; binary switching information: 2 |
| IO-Link functions (acyclical) | switch-on cycle counter; operating hours counter; internal temperature; application specific tag |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1444 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -20...60 |
| Protection | IP 67 |
| Approval | BVS 17 ATEX E 112 X; IECEx BVS 17.0094X |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 10 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 10 V; EN55011: class B |
| Vibration resistance | EN 60068-2-6 Fc: 20 g (10...3000 Hz); 50 sweep cycles per frequency; 1 octave per minute in 3 axes |
| Shock resistance | EN 60068-2-27 Ea: 100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
| Continuous shock resistance | EN 60068-2-27: 43 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes |
| Fast temperature changes | EN 60068-2-14 Na: TA = -25°C; TB = 80°C; t1 = 30 min; t2 = <10 s 50 cycles |
| Salt spray test | EN 60068-2-52 Kb: severity level 5 (4 test cycles) |
| MTTF [years] | 471 |
| Масса | 78.9 |
| Mounting | flush mountable |
| Thread designation | M18 x 1 |
| Материал | housing: stainless steel (1.4404 / 316L); sensing face: PA; LED window: PEI; lock nuts: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] | 35 |
| Display | Power: 4 x LED, green; Switching output: 4x LED, yellow; Error message: 4x LED, red |
| Items supplied | lock nuts: 2 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |