ifm electronic gmbh DP2200
Evaluation system and display for analog signals, Analog Threshold Displ./4-20mA
Технические характеристики
| Application | decentralized display, preprocessing and conversion of analog signals |
|---|---|
| Напряжение питания | 18...30 DC; (to SELV/PELV) |
| Напряжение питания | 24 |
| Current consumption [mA] | 30...900 |
| Max. current load total [A] | 0.8 |
| Number of inputs and outputs | Number of analog inputs: 1; Number of digital outputs: 1; Number of analog outputs: 1 |
| Sensor supply of the inputs | from the operating voltage |
| Number of analog inputs | 1 |
| Analog input (current) [mA] | 4...20 |
| Resolution of analog input | 10 Bit |
| Number of digital outputs | 1 |
| Напряжение питания | 10...30 |
| Output function | normally open / closed; (configurable) |
| Max. current load per output [mA] | 50 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20 |
| Accuracy | 0.75; (% of the final value of the measuring range analog input) |
| Communication interface | IO-Link |
| Supported DeviceIDs | Type of operation: DeviceID; IO-Link Device: 610 |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 1 |
| Min. process cycle time [ms] | 3.2 |
| Рабочая температура | -25...60 |
| Storage temperature [°C] | -25...70 |
| Max. relative air humidity [%] | 90; (linearly decreasing to 50 % (40 °C); non condensing) |
| Max. height above sea level [m] | 4000 |
| Protection | IP 67 |
| Pollution degree | 2 |
| MTTF [years] | 373 |
| UL approval | Ta: max. 55 °C; File number UL: E205959 |
| Масса | 84.4 |
| Housing | rectangular |
| Dimensions [mm] | 63 x 30 x 24 |
| Материал | housing: PA |
| Display | Switching status: LED, yellow; Power: LED, green; 7-segment LED display, red/green 4-digit configurable; digit height 6,8 mm; digit width 3,8 mm |
| Accessories (optional) | mounting clip |
| Remarks | Further information is available in the manual.; the device complies with overvoltage category II |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5 |