ifm electronic gmbh DTE602
Compact RFID device with fieldbus interface, DTRHF HLRWEIUS03
Категории:
Технические характеристики
| Radio approval for | USA; Canada; EU/RED; Australia; China; South Korea; Japan; Taiwan; Singapore; India; Malaysia; Vietnam; Indonesia |
|---|---|
| Note on radio approval | The list of countries applying the European Radio Equipment Directive 2014/53/EU (RED) can be found under “Downloads”. |
| Напряжение питания | 19.2...28.8 DC |
| Current consumption [mA] | 500 |
| Protection class | III |
| Operating frequency [MHz] | 13,56 |
| RFID standard | ISO 15693 |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Total number of outputs | 2 |
| Electrical design | push-pull |
| Number of digital outputs | 2 |
| Напряжение питания | 2 |
| Max. current load per output [mA] | 100; (max.) |
| Short-circuit protection | yes |
| Overload protection | yes |
| Distance write/read head front [mm] | 600 |
| Distance write/read head side [mm] | 850 |
| Note on distance write/read head | 100%: transmission power |
| Distance to the ID tag [mm] | 50 mm transponder: :: ≤ 150; ISO card: :: ≤ 180 |
| Communication interface | Ethernet |
| Protocol | TCP/IP |
| Usage type | Parameter setting; Data transmission |
| Factory settings | IP address: 192.168.0.79; subnet mask: 255.255.255.0; gateway IP address: 192.168.0.100 |
| Рабочая температура | -20...60 |
| Storage temperature [°C] | -25...80 |
| Protection | IP 67 |
| Shock resistance | IEC 60028-2-27: 40 g (6 ms) / bump; 50 g (11 ms) / single shock |
| Vibration resistance | EN 60068-2-6: 2 g (10...150 Hz) |
| MTTF [years] | 130 |
| Масса | 640.5 |
| Dimensions [mm] | 113 x 118.6 x 50 |
| Материал | lower part: aluminum; Upper part: PBT / PC; plug: stainless steel |
| Display | voltage supply: 1 x LED, green; LED display: 4 x LED, yellow signal strength ID tag; status: 2 x LED, green/red fieldbus interface; status: 2 x LED, green/yellow Ethernet |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5 |