ifm electronic gmbh E30398
IO-Link memory plug, MEMORY PLUG
Технические характеристики
| Напряжение питания | 18...32 DC |
|---|---|
| Current consumption [mA] | < 35 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Output signal | IO-Link |
| Electrical design | PNP |
| Напряжение питания | 0.5 |
| Permanent current rating of switching output DC [mA] | 500; (briefly: 2 A / 50 ms) |
| Type of short-circuit protection | depending on the connected sensor |
| Communication interface | IO-Link |
| Transmission type | COM1 (4,8 kBaud); COM2 (38,4 kBaud); COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SIO mode | no |
| Required master port class | A |
| Min. process cycle time [ms] | 2.5 |
| SDCI standard | IEC 61131-9 (Draft) |
| Number of ports class A | 1 |
| Рабочая температура | -25...60 |
| Storage temperature [°C] | -40...85 |
| Protection | IP 65; IP 67 |
| EMC | EN 61000-6-2 |
| Shock resistance | DIN IEC 68-2-27: 50 g 11 ms |
| Vibration resistance | DIN IEC 68-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 656 |
| Масса | 116.5 |
| Housing | rectangular |
| Dimensions [mm] | 52 x 25 x 18 |
| Материал | PA PACM 12 (TROGAMID); PET |
| Материал | FKM |
| Display | Power: 2 x LED, green |
| Remarks | Only for positive switching sensors; The memory plug acts as master if it is connected with a sensor.; The memory plug acts as device if it is used with the service program.; cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4; Moulded body: TPU (urethane); Locking: stainless steel (1.4404 / 316L); sealing: FKM |