ifm electronic gmbh IG515A
Inductive sensor, IGA2008-FRKG/3D
Категории:
Технические характеристики
| Electrical design | PNP/NPN |
|---|---|
| Output function | normally open / closed; (selectable) |
| Sensing range [mm] | 8 |
| Housing | Threaded type |
| Dimensions [mm] | M18 x 1 / L = 80 |
| Application | For applications in hazardous areas |
| Installation | use in hazardous areas only with installed protective cover |
| Напряжение питания | 10...30 DC |
| Protection class | III |
| Reverse polarity protection | yes |
| Напряжение питания | 4.6 |
| Minimum load current [mA] | 4 |
| Max. leakage current [mA] | 0.5 |
| Permanent current rating of switching output DC [mA] | 150 |
| Switching frequency DC [Hz] | 300 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Real sensing range Sr [mm] | 8 ± 10 % |
| Operating distance [mm] | 0...6.48 |
| Correction factor | steel: 1 / stainless steel: 0.7 / brass: 0.4 / aluminum: 0.3 / copper: 0.2 |
| Hysteresis [% of Sr] | 1...20 |
| Switch-point drift [% of Sr] | -10...10 |
| Рабочая температура | -20...60 |
| Protection | IP 67 |
| ATEX marking | II 3D Ex tc IIIC T80°C Dc X |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 10 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 10 V; IEC 60255-5: 1 kV line to line, Ri: 500 Ohm; EN 55011: class B |
| MTTF [years] | 1674 |
| Масса | 179 |
| Mounting | non-flush mountable |
| Thread designation | M18 x 1 |
| Материал | housing: brass white bronze coated; sensing face: PBT orange; Protective cover: PA; end cap: TPU (urethane); lock nuts: brass white bronze coated |
| Display | Switching status: 1 x LED, yellow |
| Items supplied | lock nuts: 3 x M18; Protective cover: 1 x (M18 / Ø 23 mm) |
| Pack quantity | 1 pcs. |
| Cable | 2 m, PUR; 2 x 0.5 mm² |