ifm electronic gmbh IIT244
Inductive full-metal sensor, IIK3012BFRKG/AM/IO/US-104
Категории:
Технические характеристики
| Electrical design | PNP/NPN; (configurable) |
|---|---|
| Output function | normally open / closed; (configurable) |
| Communication interface | IO-Link |
| Housing | Threaded type |
| Dimensions [mm] | M30 x 1.5 / L = 65 |
| Special feature | Full-metal housing |
| Application | Use in hygienic areas / regular cleaning processes |
| Pressure rating | 100 bar: 10 MPa |
| Note on pressure rating | sensing face |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | < 15 |
| Protection class | III |
| Reverse polarity protection | yes |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 50 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Switch point IO-Link [mm] | 2.44...12.16; (configurable) |
| Measuring range IO-Link [mm] | 1.3...13 |
| Correction factor | steel: 1 / stainless steel: 0.7 / brass: 0.6 / aluminum: 0.5 / copper: 0.2 |
| Hysteresis [% of Sr] | 3...15 |
| Linearity error IO-Link [%] | ± 2; (of the final value of the measuring range) |
| Repeatability IO-Link [%] | ± 1; (of the final value of the measuring range) |
| Temperature coefficient | ± 0,2 %/K; (of the final value of the measuring range) |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Multiple switching signal; Function: Teach channel; Common - I&D: Identification and Diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 3.2 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1090 |
| Рабочая температура | 0...100 |
| Protection | IP 65; IP 66; IP 67; IP 68; IP 69K |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 10 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 10 V; EN 55011: class B |
| Impact resistance | 1 J |
| Vibration resistance | EN 60068-2-6 Fc: 20 g (10...3000 Hz) / 50 sweep cycles per frequency; 1 octave per minute in 3 axes |
| Shock resistance | EN 60068-2-27 Ea: 100 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
| Continuous shock resistance | EN 60068-2-27: 40 g 6 ms; 4000 shocks each in every direction of the 3 coordinate axes |
| Fast temperature changes | EN 60068-2-14 Nc: TA = 0°C; TB = 100°C; t1 = 30 min; t2 = < 10 s 50 cycles |
| Salt spray test | EN 60068-2-52 Kb: severity level 5 (4 test cycles) |
| MTTF [years] | 635 |
| Embedded software included | yes |
| UL approval | Ta: -25...70 °C; Enclosure type: Type 1; voltage supply: Limited Voltage/Current; UL approval number: A008; File number UL: E174191 |
| Масса | 128.7 |
| Mounting | flush mountable |
| Thread designation | M30 x 1.5 |
| Материал | housing: stainless steel (1.4404 / 316L); sensing face: stainless steel (1.4404 / 316L); LED window: PEI; lock nuts: stainless steel (1.4404 / 316L) |
| Tightening torque [Nm] | 80 |
| Full-metal housing | yes |
| Display | Switching status: 4 x LED, yellow |
| Items supplied | lock nuts: 2 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 3 |