ifm electronic gmbh IM0011
Inductive sensor, IME2015BFBOA
Категории:
Технические характеристики
| Output function | normally open / closed; (selectable) |
|---|---|
| Sensing range [mm] | 15 |
| Housing | rectangular |
| Dimensions [mm] | 40 x 40 x 121 |
| Напряжение питания | 20...250 AC/DC |
| Protection class | II |
| Reverse polarity protection | no |
| Напряжение питания | 6 |
| Напряжение питания | 6.5 |
| Minimum load current [mA] | 5 |
| Max. leakage current [mA] | 2.5 (250 V AC) / 1.3 (110 V AC) / 0.8 (24 V DC) |
| Permanent current rating of switching output AC [mA] | 250; (350 (...50 °C)) |
| Permanent current rating of switching output DC [mA] | 100 |
| Short-time current rating of switching output [mA] | 2200; (20 ms / 0,5 Hz) |
| Switching frequency AC [Hz] | 20 |
| Switching frequency DC [Hz] | 55 |
| Short-circuit protection | no |
| Short-circuit proof | no |
| Overload protection | no |
| Real sensing range Sr [mm] | 15 ± 10 % |
| Operating distance [mm] | 0...12.1 |
| Increased sensing range | no |
| Correction factor | steel: 1 / stainless steel: 0.7 / brass: 0.4 / aluminum: 0.3 / copper: 0.2 |
| Hysteresis [% of Sr] | 1...15 |
| Switch-point drift [% of Sr] | -10...10 |
| Рабочая температура | -25...80 |
| Protection | IP 65 |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated: 10 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 10 V; EN 55011: class B; EN 60947-5-2 |
| MTTF [years] | 603 |
| Embedded software included | no |
| Масса | 204.25 |
| Mounting | flush mountable |
| Материал | sensing face: PPE orange; connection module: PPE black; screw: steel galvanized |
| Display | Switching status: 1 x LED, yellow |
| Required protection | miniature fuse to IEC60127-2 sheet 1; ≤ 2 A; fast acting |
| Remarks | Recommendation: check the unit for reliable function after a short circuit.; 5 positions of the active zone possible |
| Pack quantity | 1 pcs. |
| terminals | ...2.5 mm²; Cable sheath: Ø 7...13 mm; Cable gland: M20 X 1.5 |