ifm electronic gmbh IN0098
Inductive sensor, IN-2004-ABOA
Категории:
Технические характеристики
| Output function | normally open |
|---|---|
| Sensing range [mm] | 4 |
| Housing | rectangular |
| Dimensions [mm] | 40 x 12 x 26 |
| Напряжение питания | 20...250 AC/DC |
| Protection class | II |
| Reverse polarity protection | no |
| Напряжение питания | 6 |
| Напряжение питания | 6.7 |
| Minimum load current [mA] | 5 |
| Max. leakage current [mA] | 2.0 (250 V AC) / 1.3 (110 V AC) / 0.8 (24 V DC) |
| Permanent current rating of switching output AC [mA] | 250; (350 (...50 °C)) |
| Permanent current rating of switching output DC [mA] | 100 |
| Short-time current rating of switching output [mA] | 2200; (50 ms / 1 Hz) |
| Switching frequency AC [Hz] | 25 |
| Switching frequency DC [Hz] | 50 |
| Short-circuit proof | no |
| Overload protection | no |
| Real sensing range Sr [mm] | 4 ± 10 % |
| Operating distance [mm] | 0...3.25 |
| Correction factor | steel: 1 / stainless steel: 0.9 / brass: 0.6 / aluminum: 0.5 / copper: 0.4 |
| Hysteresis [% of Sr] | 1...20 |
| Switch-point drift [% of Sr] | -10...10 |
| Рабочая температура | -25...80 |
| Protection | IP 67 |
| EMC | EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; EN 61000-4-3 HF radiated; EN 61000-4-4 Burst: 2 kV; EN 61000-4-6 HF conducted: 3 V; EN 55011 emission: class B |
| MTTF [years] | 609 |
| CSA approval | Ta: -25...60 °C; Classification: Class I; Div. 2; Groups A, B, C, D; T4; Class II; Div. 2; Groups F, G; T135 °C; Class III |
| Масса | 105.7 |
| Mounting | non-flush mountable |
| Материал | housing: PBT |
| Tightening torque [Nm] | < 1.2; (when brass insert in contact with counterpart) |
| Display | Switching status: 1 x LED, yellow |
| Required protection | miniature fuse to IEC60127-2 sheet 1; ≤ 2 A; fast acting |
| Remarks | Recommendation: check the unit for reliable function after a short circuit. |
| Pack quantity | 1 pcs. |
| Cable | 2 m, PVC; 2 x 0.5 mm² |