ifm electronic gmbh JBC234
dynamic inclination sensor, INC-K2M180BIAKG/US-V
Категории:
Технические характеристики
| Measuring principle | MEMS capacitive; (3D-Accelerometer ; 3D-gyroscope) |
|---|---|
| Communication interface | IO-Link |
| Housing | rectangular |
| Number of measurement axes | 3 |
| Angular range [°] | ± 90; (complete 360° measurement) |
| Design | dynamic inclination sensor for vertical installation position |
| Function principle | dynamic |
| Application | use in mobile and industrial applications |
| Напряжение питания | 9...32 DC; (IO-Link: 18...30 DC); (to SELV/PELV: energy-limited circuits according to IEC/UL 61010-1 3rd ed. cl. 9.4) |
| Напряжение питания | 12...24 |
| Current consumption [mA] | < 20; (without load 12 V) |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Напряжение питания | II |
| Power-on delay time [s] | < 0.1 |
| Number of inputs and outputs | Number of digital inputs: 1; Number of digital outputs: 2 |
| Number of digital inputs | 1; (teach input) |
| Output signal | IO-Link; switching signal |
| Electrical design | PNP/NPN; (configurable) |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Напряжение питания | 2 |
| Permanent current rating of switching output DC [mA] | 100 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Frequency of the output [Hz] | 250; (4 ms) |
| Frequency range [Hz] | 50 |
| Measuring range acceleration [g] | ± 8 |
| Resolution [g] | 0.001 |
| Measuring range vehicle yaw rate [°/s] | ± 1000 |
| Measuring range [°C] | -40...85 |
| Resolution [°C] | 0.1 |
| Repeatability [°] | ± 0,05 |
| Resolution [°] | 0.01 |
| Temperature coefficient [1/K] | ≤ ± 0,005° |
| Accuracy [K] | ± 5,0 |
| Accuracy [°] | ± 0,25 |
| Parameter setting options | Mounting orientation; application profiles; detection of measuring range exceedance / acceleration; ECO-Mode; Teach function; inversion and swapping of the process values |
| Diagnostic functions | self-test |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1.4 |
| SDCI standard | IEC 61131-9: 2019-06 |
| Profiles | Smart Sensor - SSP 4.3.2: Measuring and Switching Sensor, floating point, 2 channel; BLOB: Binary Large Object transfer; Common - I&D: Identification and Diagnosis; Extension: Quantity detection, switches when value exceeds the setpoint; Function: Locator; Function: ProductURI |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 1.4 |
| IO-Link process data (cyclical) | Function: bit length; Pitch: 32; Roll: 32; device status: 4; measuring range exceedance / acceleration: 1; SSC1.1: 1; SSC1.2: 1; SSC2.1: 1; SSC2.2: 1 |
| IO-Link functions (acyclical) | temperature measurement; detection of measuring range exceedance / acceleration; operating hours counter; Mounting orientation; application profiles; LP filter; raw data; Hysteresis; window; Switch points; switching logic; self-test |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1967 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -40...80 |
| Storage temperature [°C] | -40...85 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 5000 |
| Protection | IP 6K7; IP 6K8; IP 6K9K; (ISO 20653) |
| UV radiation | ISO 16750-4, DIN ISO 4892-2 |
| Chemical media | ISO 16750-5: AA, AB, AC, BA, BB, BC, BE, BF, CC, DA, DB; chemical resistance of the plastics ; only one chemical permitted at a time |
| EMC | EN IEC 61000-6-2: noise immunity / industrial environments; EN IEC 61000-6-3: noise emission in domestic areas; EN IEC 61326-2: electrical equipment for measurement, control and laboratory use; DIN EN 12895: industrial trucks; DIN ISO 16750-2: pulse 5 (load dump) |
| Shock resistance | DIN EN 60068-2-27: 30 g 6 ms half-sine; 2000 shocks each in every direction of the 6 load axes / Tmin + Tmax; ISO 16750-3; DIN EN 60068-2-27: 500-600 g 1 ms half-sine; 3 impacts each in every direction of the 6 load axes |
| Vibration resistance | DIN EN 60068-2-6: 10 g / (10...2000 Hz) 10 frequency cycles in 3 axes; DIN EN 60068-2-64: 5.79 g RMS / (10...2000 Hz) 32 hours in 3 axes |
| Climatic tests | DIN EN 60068-2-14 |
| Damp heat | ISO 16750-4; IEC 60068-2-38 |
| MTTF [years] | 282 |
| UL approval | Ta: -40...65 °C; Enclosure type: Type 1 / IP 67; File number UL: E364788 |
| Масса | 33 |
| Type of mounting | screw mounting; (2 x M4) |
| Dimensions [mm] | 57.7 x 35 x 19.6 |
| Материал | housing: PA reinforced glass-fiber; fixing element: stainless steel (1.4305 / 303) |
| Mounting orientation | vertical |
| Tightening torque [Nm] | 2.4 |
| Display | Power: 1 x LED, green; Switching status, Teach function: 1 x LED, yellow; fault: 1 x LED, red |
| Operating elements | 1 x: Teach-Taste |
| Items supplied | Torx-cylinder head bolt: 2 x M4 x 14, Screw retention; drilling template |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5; Maximum cable length: 20 m |