ifm electronic gmbh JN2201
Inclination sensor, INC-M2M090ABIAKG/US
Категории:
Технические характеристики
| Measuring principle | MEMS capacitive |
|---|---|
| Communication interface | IO-Link |
| Number of measurement axes | 2 |
| Angular range [°] | ± 45 |
| Function principle | static |
| Application | High-precision inclination measurement in 2 axes for mobile and industrial applications |
| Напряжение питания | 9.2...30 DC; (voltage output: 12...30 DC; IO-Link: 18...30 DC) |
| Current consumption [mA] | 100; (24 V DC, 25 °C) |
| Max. current consumption [mA] | 380; (9,2 V DC; -40 °C) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 300; (warm-up time; Max. initialization time: 1000 ms) |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 2 |
| Total number of outputs | 4 |
| Output signal | analog signal; switching signal |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (programmable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 125; (125 mA (85° C); 200 mA (60° C); 250 mA (40° C)) |
| Number of analog outputs | 2 |
| Analog current output [mA] | 4...20; (in case of a fault: 2 mA) |
| Max. load [Ω] | 220; (220 (9,2…15 V) / 500 (15…30 V)) |
| Напряжение питания | 2...10; (in case of a fault: 1 V) |
| Min. load resistance [Ω] | 1000; (10000 (12...13,5 V) / 1000 (13,5...30 V)) |
| Precision analog output [%] | ≤ 1 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Limit frequency [Hz] | 0.5...10; (configurable) |
| Accuracy [°] | ≤ ± 0,01; (absolute) |
| Hysteresis [°] | ≤ ± 0,05 |
| Repeatability [°] | ≤ ± 0,01 |
| Resolution [°] | 0.01 |
| Temperature coefficient [1/K] | ≤ ± 0,0008 ° |
| Parameter setting options | angle (X/Y); hysteresis / window; Switch points; switching logic; fault indication; self-test; current/voltage output |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 2 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 417 |
| Рабочая температура | -40...85 |
| Storage temperature [°C] | -40...85 |
| Protection | IP 65; IP 67; IP 68; IP 69K |
| EMC | DIN EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated: 10 V/m; DIN EN 61000-4-4 Burst: 2 kV; DIN EN 61000-4-6 HF conducted: 10 V; DIN EN 55022 class B / CISPR 16-2-3: 30 - 1000 MHz; CISPR 25 ECE R 10: 30 - 1000 MHz narrowband and broadband; ISO 11452-2 ECE R 10: 20 - 2000 MHz / 30 V/m; ISO 7637-2 ECE R 10: pulse 1, 2a, 2b, 3a, 3b, 4, and pulse emission during operation, switching-on, switching-off; ISO 7637-3: - 80 V pulse a / + 80 V pulse b |
| Shock resistance | DIN EN 60068-2-27: 100 g 1 ms / 10000 Impacts per axis (X/Y); DIN EN 60068-2-29: 30 g 6 ms / 24000 shock (bump) |
| Vibration resistance | DIN EN 60068-2-64: 10...2000 Hz Test VII / random, mounting place car body; DIN EN 60068-2-6: 10...500 Hz / 10 g 10 cycles/axis, sine |
| Salt spray test | DIN EN 60068-2-52: severity level 5 (motor vehicle) |
| Damp heat | DIN EN 60068-2-30: 55 °C cyclic upper temperature / 95 % rh 2 cycles of 24 h |
| MTTF [years] | 176 |
| Standard | Compliant with ECE R 10, rev. 5; ISO 7637-3: 2007-07 |
| Масса | 451 |
| Dimensions [mm] | 90 x 62 x 33.2 |
| Материал | housing: diecast zinc nickel-plated |
| Mounting orientation | Horizontal |
| Display | Power: 1 x LED, green; Set point: 1 x LED, yellow |
| Items supplied | Protective cover |
| Remarks | the device complies with overvoltage category II |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |