ifm electronic gmbh KI000A
Capacitive sensor, KIE2150NFBOA/3D
Категории:
Технические характеристики
| Output function | normally open / closed; (selectable) |
|---|---|
| Sensing range [mm] | 15 |
| Housing | Threaded type |
| Dimensions [mm] | M30 x 1.5 / L = 150 |
| Напряжение питания | 30...250 AC / 20...250 DC |
| Protection class | II |
| Reverse polarity protection | yes |
| Measuring principle | capacitive |
| Напряжение питания | 8 |
| Напряжение питания | 10 |
| Minimum load current [mA] | 5 |
| Max. leakage current [mA] | 2.5 (250 V AC) / 1.7 (110 V AC) / 1.5 (24 V DC) |
| Permanent current rating of switching output AC [mA] | 100; (150 (...40 °C)) |
| Permanent current rating of switching output DC [mA] | 100; (150 (...40 °C)) |
| Short-time current rating of switching output [mA] | 1000; (20ms / 0,5Hz) |
| Switching frequency AC [Hz] | 10 |
| Switching frequency DC [Hz] | 10 |
| Notes on switching frequency [Hz] | only for resistive loads; 2 Hz for utilization category AC-140 |
| Short-circuit proof | no |
| Overload protection | no |
| Sensing range adjustable | yes |
| Factory setting sensing range [mm] | 15 |
| Real sensing range Sr [mm] | 15 ± 10 % |
| Correction factor | glass: 0.4 / water: 1 / ceramics: 0.2 / PVC: 0.2 |
| Hysteresis [% of Sr] | 1...15 |
| Switch-point drift [% of Sr] | -20...20 |
| Рабочая температура | -20...60 |
| Protection | IP 65; IP 67 |
| ATEX marking | II 3D Ex tc IIIC T90°C Dc |
| EMC | EN 61000-4-2 ESD: kV / 8 kV AD; EN 61000-4-3 HF radiated: 3 V/m; EN 61000-4-4 Burst: 2 kV; EN 61000-4-5 Surge: 1 kV line to line, Ri: 2 Ohm; EN 61000-4-6 HF conducted: 3 V; EN 55011: class B |
| MTTF [years] | 305 |
| Масса | 150 |
| Mounting | non-flush mountable |
| Thread designation | M30 x 1.5 |
| Материал | housing, cover, end cap: PPA; Nut: PA; potentiometer: PBT |
| Display | Switching status: 1 x LED, yellow |
| Required protection | miniature fuse to IEC60127-2 sheet 1; ≤ 2 A; fast acting; Place the fuse outside the hazardous area. |
| Items supplied | lock nuts: 2 |
| Remarks | Recommendation: check the unit for reliable function after a short circuit. |
| Pack quantity | 1 pcs. |
| terminals | 0.34...2.5 mm²; Cable sheath: Ø 5...9 mm; Cable gland: M20 X 1.5 |