ifm electronic gmbh KQ1001
Continuous level sensor, KQ-5xxxNFPKG/IO/0,1M/US
Категории:
Технические характеристики
| Electrical design | PNP/NPN; (configurable) |
|---|---|
| Communication interface | IO-Link |
| Housing | rectangular |
| Dimensions [mm] | 255 x 28 x 16.7 |
| Application | Continuous level measurement behind non-metallic and non-conductive surfaces |
| Media | dry bulk material; aqueous solutions; oils |
| Cannot be used for | very adhesive media |
| Напряжение питания | 10...30 DC; (IO-Link: 18...30 DC) |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 1300 |
| Measuring principle | capacitive |
| Number of inputs and outputs | Number of digital outputs: 3 |
| Number of digital outputs | 3 |
| Permanent current rating of switching output DC [mA] | 200 |
| Max. resistance switching output [Ω] | 8 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Measuring range [mm] | < 200 |
| Detection range [mm] | 228 |
| Set point SP [%] | 5...95 |
| Reset point rP [%] | 4...94 |
| In steps of [%] | 1 |
| Repeatability [% of the final value] | 2 |
| Offset deviation [% of the final value] | 4 |
| Resolution [% of the final value] | 1 |
| Linearity deviation [% of the final value] | 1 |
| Время отклика | 1300 |
| Parameter setting options | Damping; hysteresis / window; fault indication; Diagnostic function; Sensitivity; internal temperature; limitation of measuring range; adjustable switching delay; zero-point calibration; direction of installation; LEDs can be deactivated |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 3 |
| Min. process cycle time [ms] | 7.2 |
| IO-Link process data (cyclical) | Function: bit length; process value: 16; exponent: 8; device status: 4; binary switching information: 3 |
| IO-Link functions (acyclical) | direction of installation; limitation of sensor elements; Sensitivity; minimum recognition threshold; Performance in case of a fault; error delay; Damping; LED mode; switch-on cycle counter; operating hours counter; switching cycles counter; min./max. process value; internal temperature; min./max. internal temperature; diagnostic data level |
| Supported DeviceIDs | Type of operation: DeviceID; default: 924 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Applications | DIN EN 60654-1 application class B2 |
| Рабочая температура | -20...80 |
| Storage temperature [°C] | -25...85 |
| Protection | IP 65 |
| EMC | DIN EN 61000-6-4 30 - 230 MHz: 40 dBµV/m QP / 10 m distance; 230 - 1 GHz: 47 dBµV/m QP / 10 m distance; DIN EN 61000-4-2: ± 25 kV AD / ± 25 kV CD; DIN EN 61000-4-3: 80 MHz - / 1 GHz 10 V/m; DIN EN 61000-4-4: ± 2.5 kV / 5 kHz; ± 2.5 kV / 100 kHz; DIN EN 61000-4-6: 10 V |
| Shock resistance | EN 60068-2-27: 15 g 11 ms |
| Vibration resistance | EN 60068-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 290 |
| UL approval | Ta: -25...60 °C; Enclosure type: Type 1; voltage supply: Limited Voltage/Current; UL approval number: D006; File number UL: E174191 |
| Масса | 377.5 |
| Материал | housing: PBT; cover: PC |
| Display | Power: 1 x LED, green; Switching status: 3 x LED, yellow; Function: 20 x LED, green |
| Items supplied | adhesive tape: 1 x (1,2 x 23 x 240 mm) |
| Accessories (optional) | Mounting adapter: 2, E12675; Mounting adapter: 2, E12676; Fixing strap: 5, E10880; adhesive tape: 10, E12677 |
| Remarks | When used on IO-Link class B masters, switching outputs OUT2, OUT3 must be turned off |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5 |
| Cable | 0.1 m, PUR |