ifm electronic gmbh LDH112
Oil humidity sensor, OIL HUMIDITY SENSOR IO-LINK
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 1 |
|---|---|
| Process connection | threaded connection G 1/2 |
| Special feature | gold-plated contacts |
| Media | mineral oils; synthetic esters; biodegradable oils |
| Cannot be used for | See operating instructions, chapter "Intended use". |
| Medium temperature [°C] | -40...120 |
| Pressure rating | 50 bar: 5 MPa |
| Vacuum resistance [mbar] | -1000 |
| Напряжение питания | 18...30 DC |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 2 |
| Max. current load total [A] | 0.065 |
| Total number of outputs | 1 |
| Output signal | IO-Link |
| Number of digital outputs | 1 |
| Measuring range [% RH] | 0...100 |
| Measuring range [°C] | -40...120 |
| Accuracy | ± 3; ( ± 5 % in the range < 10 %, > 90 %) |
| Repeatability | ± 0,5 % |
| Resolution [%] | 0,1; (process value) |
| Accuracy [K] | ± 1 |
| Repeatability [K] | ± 0,5 |
| Resolution [K] | 0.1 |
| Время отклика | oil: T09 < 30 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D: Identification and Diagnosis; Function: Measurement data, standard resolution |
| SIO mode | no |
| Required master port class | A |
| Process data analog | 5 |
| Min. process cycle time [ms] | 4.5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1249 |
| Рабочая температура | -40...85 |
| Storage temperature [°C] | -40...85 |
| Max. relative air humidity [%] | 100 |
| Protection | IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68) |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-4 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 284 |
| UL approval | File number UL: E364788 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Масса | 119.55 |
| Материал | stainless steel (1.4404 / 316L); PEI; sealing: FKM |
| Материал | stainless steel (1.4404 / 316L); PA6 GF50; epoxy resin; sealing: NBR |
| Remarks | Accuracy values expressed in percent refer to the measuring span |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12 (EN 61067-2-101); coding: A; Contacts: 4, gold-plated |