ifm electronic gmbh LDL101
Conductive conductivity sensor, COND CONDUCTIVITY UPW HYG G1/2
Категории:
Технические характеристики
| Number of inputs and outputs | Number of analog outputs: 1 |
|---|---|
| Process connection | threaded connection G 1/2 external thread sealing cone optional:hygienic PEEK gasket according to EHEDG |
| Special feature | gold-plated contacts |
| Media | Conductive liquids |
| Note on media | ultra-pure water |
| Cannot be used for | See the operating instructions, chapter "Function and features". |
| Medium temperature [°C] | -25...100; (< 1 h: 150) |
| Pressure rating | 35 bar: 3.5 MPa |
| Vacuum resistance | -1000 mbar: -0.1 MPa |
| Напряжение питания | 18...30 DC |
| Current consumption [mA] | < 60 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 2 |
| Measuring principle | konduktiv |
| Total number of outputs | 1 |
| Output signal | analog signal; IO-Link |
| Output function | analog output scalable; selectable conductivity / temperature |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | 500 |
| Measuring range [µS/cm] | 0.04...1000 |
| Resolution [µS/cm] | 0...9,999: 0.001; 10...99,99: 0.01; 100...1000: 0.1 |
| Measuring range [°C] | -25...150 |
| Accuracy (in the measuring range) | 3 % MW ± 0,03 µS/cm |
| Drift [%/K] | 0,1 %/K MW |
| Repeatability | 1 % MW ± 0,010 µS/cm |
| Long-term stability | 1,5 % MW ± 0,015 µS/cm |
| Accuracy [K] | 20...50 °C: < ± 0,5 K; -25...150 °C: < ± 1,5 K |
| Repeatability [K] | 0,2 |
| Resolution [K] | 0.1 |
| Время отклика | < 9; (T09) |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis |
| SIO mode | no |
| Required master port class | A |
| Process data analog | 1 |
| Min. process cycle time [ms] | 6.4 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1455 |
| Рабочая температура | -40...60 |
| Storage temperature [°C] | -40...85 |
| Protection | IP 68; IP 69K; (7 days / 3 m water depth / 0.3 bar: IP 68) |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 173 |
| UL approval | File number UL: E364788 |
| Масса | 346.8 |
| Материал | stainless steel (1.4404 / 316L); PEI; FKM |
| Материал | stainless steel (1.4435 / 316L); PEEK |
| Surface characteristics Ra/Rz of the wetted parts | Ra ≤ 0.8 µm |
| Remarks | MW = Measured value |
| Notes | Digital meets analog: integrating modern IO-Link sensors the analog way. The EIO104 allows you to realize two analog signals from intelligent IO-Link sensors with several process values. |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12 (EN 61067-2-101); coding: A; Contacts: 4, gold-plated |