ifm electronic gmbh LDL321
Conductive conductivity sensor, COND CONDUCTIVITY UPW 1/2NPT
Категории:
Технические характеристики
| Number of inputs and outputs | Number of analog outputs: 1 |
|---|---|
| Process connection | threaded connection 1/2" NPT external thread |
| Special feature | gold-plated contacts |
| Media | Conductive liquids |
| Note on media | ultra-pure water |
| Cannot be used for | See the operating instructions, chapter "Function and features". |
| Medium temperature [°C] | -25...80 |
| Pressure rating | 16 bar: 1.6 MPa |
| Note on pressure rating | at max. +80 °C |
| Vacuum resistance | -1000 mbar: -0.1 MPa |
| Напряжение питания | 18...30 DC |
| Current consumption [mA] | < 60 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 2 |
| Measuring principle | konduktiv |
| Total number of outputs | 1 |
| Output signal | analog signal; IO-Link |
| Output function | analog output scalable; selectable conductivity / specific resistance / temperature |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20 |
| Max. load [Ω] | 500 |
| Measuring range [µS/cm] | 0.04...1000 |
| Measuring range [MΩ·cm] | 0.001...25 |
| Measuring range [°C] | -25...90 |
| Accuracy (in the measuring range) | depends on the accuracy of the conductivity measurement |
| Drift [%/K] | 0,1 %/K; (referred to the ambient / electronics temperature) |
| Repeatability | 1 % MW ± 0,00002 µS/cm |
| Long-term stability | 1,5 % MW ± 0,00002 µS/cm |
| Accuracy [K] | -25...90 °C: < ± 0,5 K/ @ 25 °C: < ± 0,015 K |
| Repeatability [K] | 0,2 |
| Resolution [K] | 0.1 |
| Время отклика | < 9; (T09) |
| Communication interface | IO-Link |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| SIO mode | no |
| Required master port class | A |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1491 |
| Рабочая температура | -25...50 |
| Storage temperature [°C] | -25...75 |
| Protection | IP 68; IP 69; (7 days / 3 m water depth / 0.3 bar: IP 68; DIN EN 60529) |
| EMC | DIN EN 61326-1: group 1: class B |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 181 |
| Масса | 291.4 |
| Housing | tubular |
| Dimensions [mm] | Ø 32 / L = 166.5 |
| Материал | housing: PP fiber-reinforced; process connection: PVDF; probe: stainless steel (1.4435 / 316L); insulator: PEEK; sealing: FKM |
| Материал | housing: PP fiber-reinforced; process connection: PVDF; probe: stainless steel (1.4435 / 316L); insulator: PEEK; sealing: FKM |
| Tightening torque [Nm] | < 8 |
| Remarks | MW = Measured value |
| Notes | Digital meets analog: integrating modern IO-Link sensors the analog way. The EIO104 allows you to realize two analog signals from intelligent IO-Link sensors with several process values. |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12 (EN 61067-2-101); coding: A; Contacts: 4, gold-plated |