LMT192

ifm electronic gmbh LMT192

Level sensor for limit detection with overspill protection (German Federal Water Act), LMCCE-A12E-QPKG-2/US

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): LMT192
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 2
Factory settingwater-based media
Process connectionthreaded connection G 1/2 sealing cone
Special featuregold-plated contacts
MediaLiquids
Recommended mediawater; water-based media; oils; oil-based media
Cannot be used forSee the operating instructions, chapter "Function and features".
Probe length [mm]38
Tank pressure-1...40; (Applications according to the German Federal Water Act (WHG): -0,5...10 bar) bar: -0.1...4; (Applications according to the German Federal Water Act (WHG): -0,5...10 bar) MPa
Medium temperature [°C]-25...85; (Applications according to the German Federal Water Act (WHG): 0...85 °C)
Medium temperature short time [°C]-25...150; (1 h; Applications according to the German Federal Water Act (WHG): 0...100 °C)
Напряжение питания18...30 DC
Current consumption [mA]< 50
Protection classIII
Reverse polarity protectionyes
Measuring principlecapacitive
Total number of outputs2
Output signalswitching signal; IO-Link
Electrical designPNP
Number of digital outputs2
Напряжение питания2.5
Permanent current rating of switching output DC [mA]100
Short-circuit protectionyes
Type of short-circuit protectionyes (non-latching)
Overload protectionyes
Время отклика< 0.5
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
SIO modeyes
Required master port classA
Process data analog1
Process data binary2
Min. process cycle time [ms]2.3
Supported DeviceIDsType of operation: DeviceID; default: 449
Рабочая температура-20...85
Рабочая температураMedium temperature 100...150 °C; -40...60 °C
Storage temperature [°C]-40...85
ProtectionIP 68; IP 69K
ApprovalWHG; General building authority approval; overflow prevention
EMCDIN EN 61000-6-2; DIN EN 61000-6-4: open tanks; DIN EN 61000-6-3: closed tanks
Shock resistanceDIN EN 60068-2-27: 50 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]223
UL approvalUL approval number: H001
Масса249
Dimensions [mm]Ø 30 / L = 125
Материалstainless steel (1.4404 / 316L); PEEK; PEI; FKM
МатериалPEEK surface characteristics: Ra < 0,8 µm / Rz = 4 µm
DisplaySwitching status: LED, yellow; operating status: LED, green
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции