ifm electronic gmbh NI5003
Inductive NAMUR sensor, II-2015-N/1D/1G/2G
Категории:
Технические характеристики
| Electrical design | NAMUR |
|---|---|
| Output function | normally closed |
| Sensing range [mm] | 15 |
| Housing | Threaded type |
| Dimensions [mm] | M30 x 1.5 / L = 41 |
| Application | For applications in hazardous areas |
| Connection at circuit amplifier | yes |
| Switching amplifiers | connection to certified intrinsically safe circuits with the max. values: U = 15 V / I = 50 mA / P = 120 mW |
| Напряжение питания | 8.2; (1kΩ) |
| Напряжение питания | 7.5...30; (when used outside the hazardous area) |
| Current consumption [mA] | < 1; (disabled; conductive: > 2,1) |
| Protection class | II |
| Permanent current rating of switching output DC [mA] | 30; (when used outside the hazardous area) |
| Switching frequency DC [Hz] | 200 |
| Real sensing range Sr [mm] | 15 ± 10 % |
| Correction factor | steel: 1 / stainless steel: 0.7 / brass: 0.5 / aluminum: 0.4 / copper: 0.3 |
| Hysteresis [% of Sr] | 1...15 |
| Switch-point drift [% of Sr] | -10...10 |
| Рабочая температура | -20...80 |
| Protection | IP 67 |
| Approval | PTB 01 ATEX 2191; BVS 04 ATEX E 153 X; IECEx BVS 06.0003X; TIIS TC16109 |
| ATEX marking | II 1G Ex ia IIB T6 Ga Ta -20...70°C |
| EMC | EN 60947-5-6 |
| Shock/vibration resistance | 30 g (11 ms) / 10-55 Hz (1 mm) |
| MTTF [years] | 4697 |
| Max. internal capacitance [nF] | 145 |
| Max. internal inductance [µH] | 110 |
| Масса | 175.5 |
| Mounting | non-flush mountable |
| Thread designation | M30 x 1.5 |
| Материал | housing: PBT |
| Items supplied | lock nuts: 2 |
| Pack quantity | 1 pcs. |
| Cable | 2 m, PVC; 2 x 0.5 mm² |