ifm electronic gmbh O3M251
3D sensor for mobile applications, O3MXOOKG/CAN/E3/GM/A1/70
Категории:
Технические характеристики
| Type of light | Infrared light |
|---|---|
| Image resolution [px] | 640 x 480 |
| Image resolution 3D [px] | 64 x 16 |
| Angle of aperture [°] | 90 x 67 |
| Angle of aperture 3D [°] | 70 x 23 |
| Image repetition frequency [Hz] | 25 |
| Image repetition frequency 3D [Hz] | 25 / 33 / 50 |
| Application | output of 3D image data; output of 2D image data |
| Напряжение питания | 9...32 DC |
| Current consumption [mA] | < 600 |
| Power consumption [W] | 4.6 |
| Protection class | III |
| Image sensor | PMD 3D ToF-Chip / 2D Chip |
| Video output | PAL (720x576) |
| Parameter setting options | via PC with ifm Vision Assistant |
| Communication interface | CAN; Ethernet |
| Number of CAN interfaces | 1 |
| Number of Ethernet interfaces | 1 |
| Number of video interfaces (CVBS) | 1 |
| Note on interfaces | Output of preprocessed data via CAN interface |
| Transmission rate | 250 (125...1000) kBaud |
| Protocol | UDP/IP |
| Factory settings | IP address: 192.168.1.1; subnet mask: 255.255.255.0; target IP address: 255.255.255.255; target port: 42000 |
| Usage type | Data transmission |
| Рабочая температура | -40...85 |
| Рабочая температура | with high image repetition frequency of 25Hz |
| Storage temperature [°C] | -40...105 |
| Max. relative air humidity [%] | 90; (non condensing) |
| Max. height above sea level [m] | 4000 |
| Protection | IP 67; IP 69K; (with mounted connectors or protective caps) |
| Max. immunity to extraneous light [klx] | 120 |
| EMC | DIN EN 61000-6-4: industrial environments; DIN EN 61000-6-2: industrial environments |
| Shock resistance | DIN EN 60068-2-27: 30 g / 6 ms bump |
| Vibration resistance | DIN EN 60068-2-6: 10 g / 10...500 Hz swept sine; DIN EN 60068-2-64: 10...1000 Hz noise |
| Electrical safety | DIN EN 61010-2-201: electric shock / electrical supply only via PELV circuits |
| MTTF [years] | 58 |
| Масса | 1155 |
| Dimensions [mm] | 143.8 x 85 x 70.1 |
| Материал | housing: diecast aluminium; disc: gorilla glass |
| Items supplied | Protective covers |
| Remarks | The illumination unit is required for the operation of the sensor.; Only use original ifm cables to connect sensor and illumination unit.; The function-specific performance values can be found in the applicable documentation. |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 3 |