ifm electronic gmbh O4P200
Retro-reflective sensor, O4P-DPKG/US100
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular |
| Special feature | polarization filter |
| Function principle | Retro-reflective sensor |
| Application | Industrial applications |
| Напряжение питания | 10...36 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | 20 |
| Protection class | II |
| Reverse polarity protection | yes |
| Wave length [nm] | 624 |
| Electrical design | PNP |
| Output function | dark-on mode |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 200 |
| Switching frequency DC [Hz] | 1000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Range referred to prismatic reflector [m] | 0.3...18; (Prismatic reflector Ø 80 E20005) |
| Range adjustable | no |
| Max. light spot diameter [mm] | 500 |
| Light spot dimensions refer to | at maximum range |
| Polarization filter available | yes |
| Рабочая температура | -25...60 |
| Protection | IP 67 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 502 |
| Масса | 119 |
| Dimensions [mm] | 74.4 x 27 x 63.8 |
| Материал | housing: PA; Front framework: stainless steel; LED window: PC |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Tightening torque [Nm] | < 2; (when using a mounting screw M5) |
| Display | Switching status: 1 x LED, yellow |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |