ifm electronic gmbh O5D101
Laser distance sensor, O5DLCPKG/US
Технические характеристики
| Type of light | red light |
|---|---|
| Laser protection class | 2 |
| Housing | rectangular |
| Special feature | Background suppression |
| Application | Industrial applications |
| Напряжение питания | 10...30 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | < 75; (@ 24 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 650 |
| Typ. lifetime [h] | 50000 |
| Number of inputs and outputs | Number of digital outputs: 2 |
| Total number of outputs | 2 |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (complementary) |
| Max. current load per output [mA] | 100 |
| Switching frequency DC [Hz] | 11 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. light spot diameter [mm] | 5 |
| Light spot dimensions refer to | 2 m |
| Detection range hysteresis [%] | < 2.5 |
| Note on monitoring range hysteresis | black 6 % remission |
| Background suppression available | yes |
| Background suppression [m] | < 20 |
| Measuring range [m] | 0.03...2 |
| Sampling rate [Hz] | 33 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Multiple switching signal; Function: Process data variable |
| SIO mode | yes |
| Process data analog | 1 |
| Process data binary | 1 |
| Min. process cycle time [ms] | 6.4 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 393 |
| Рабочая температура | -25...60 |
| Рабочая температура | at ta < -10 °C warm-up is necessary, laser is off |
| Protection | IP 65; IP 67 |
| Max. immunity to extraneous light [klx] | 10; (on the object) |
| EMC | EN 60947-5-2 |
| Vibration resistance | DIN EN 60068-2-6: 10 g (10...55 Hz) / 120 min. per axis (x, y, z) |
| Shock resistance | DIN EN 60068-2-27: 50 g 6 shocks / 11 ms half-sine (x, y, z) |
| Notes on laser protection | Caution:: Laser light; Power:: <= 4,0 mW; Wave length:: 650 nm; pulse:: 1,3 ns; Do not stare into beam.; Avoid exposure to the laser light.; laser class:: 2; EN / IEC60825-1:2007; EN / IEC60825-1:2014; Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
| MTTF [years] | 151 |
| Масса | 60 |
| Dimensions [mm] | 56 x 18.2 x 46.8 |
| Материал | housing: PA; Front framework: stainless steel; operator interface: TPU (urethane); lens: PMMA |
| Lens alignment | Side sensing |
| Display | Switching status: LED, yellow Switching output PIN 4; Power: LED, green; Display: alphanumeric display, 3-digit |
| Display unit | inch |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |