ifm electronic gmbh O6P202
Retro-reflective sensor, O6P-FPKG/AS/3P
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular |
| Special feature | polarization filter |
| Function principle | Retro-reflective sensor |
| Application | Industrial applications |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | 12; ((24 V)) |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 633 |
| Electrical design | PNP |
| Output function | light-on/dark-on mode; (selectable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 1000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Range referred to prismatic reflector [m] | 0.05...5; (Prismatic reflector Ø 80 E20005) |
| Range adjustable | yes |
| Max. light spot diameter [mm] | 150 |
| Light spot dimensions refer to | at maximum range |
| Polarization filter available | yes |
| Рабочая температура | -25...60 |
| Storage temperature [°C] | -40...70 |
| Max. relative air humidity [%] | 50; (70° C) |
| Protection | IP 65; IP 67 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 895 |
| UL approval | Ta: -25...40 °C; Enclosure type: Type 1; voltage supply: Class 2; UL approval number: E001 |
| Масса | 18.2 |
| Dimensions [mm] | 46 x 13 x 21 |
| Материал | housing: ABS orange; upper part of the housing: PPSU black |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Материал | EPDM |
| Tightening torque [Nm] | 0.5 |
| Display | Switching status: 1 x LED, yellow; Power: 1 x LED, green |
| Remarks | cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M8; coding: A; Contacts: 3; Locking: brass, coated; sealing: EPDM |