ifm electronic gmbh O6P309
Retro-reflective sensor, O6P-FPKG/AS/4P
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular |
| Special feature | polarization filter |
| Function principle | Retro-reflective sensor |
| Application | food and beverage industry |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | 12; ((24 V)) |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 633 |
| Electrical design | PNP |
| Output function | light-on/dark-on mode; (selectable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 1000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Range referred to prismatic reflector [m] | 0.05...5; (Prismatic reflector Ø 80 E20005) |
| Range adjustable | yes |
| Max. light spot diameter [mm] | 150 |
| Light spot dimensions refer to | at maximum range |
| Polarization filter available | yes |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Multiple switching signal |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 2.5 |
| IO-Link process data (cyclical) | Function: bit length; process value: 8; binary switching information: 1 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; switching cycles counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 422 |
| Рабочая температура | -25...80 |
| Protection | IP 65; IP 67; IP 68; IP 69K |
| EMC | EN 60947-5-2 |
| MTTF [years] | 681 |
| UL approval | Ta: -25...40 °C; Enclosure type: Type 1; voltage supply: Class 2; UL approval number: E010 |
| Масса | 34.4 |
| Dimensions [mm] | 41.3 x 13 x 21 |
| Материал | housing: stainless steel (1.4404 / 316L); sealing: EPDM; plastics: PPSU |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Tightening torque [Nm] | 1; (screws) |
| Display | Switching status: 1 x LED, yellow; Power: 1 x LED, green |
| Remarks | cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M8; coding: A; Contacts: 4 |