ifm electronic gmbh O6P702
Retro-reflective sensor, O6PLFPKG/AS/4P
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Laser protection class | 1 |
| Housing | rectangular |
| Function principle | Retro-reflective sensor |
| Application | Industrial applications |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | 15; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 650 |
| Electrical design | PNP |
| Output function | light-on/dark-on mode; (selectable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 1000 |
| Type of short-circuit protection | yes (non-latching) |
| Range [m] | 0.075...8; (Prismatic reflector 50 x 50 mm E20722) |
| Max. light spot diameter [mm] | 17 |
| Light spot dimensions refer to | at maximum range |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Multiple switching signal; Function: Device diagnosis; Function: Teach channel |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 2.5 |
| IO-Link process data (cyclical) | Function: bit length; process value: 8; device status: 4; binary switching information: 1 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; switching cycles counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 525 |
| Рабочая температура | -10...60 |
| Protection | IP 65; IP 67 |
| EMC | EN 60947-5-2 |
| Notes on laser protection | Caution:: Laser light; laser class:: 1; EN / IEC60825-1:2007; EN / IEC60825-1:2014; Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
| MTTF [years] | 636 |
| UL approval | Ta: -25...40 °C; Enclosure type: Type 1; voltage supply: Class 2 |
| Масса | 19.3 |
| Dimensions [mm] | 46 x 13 x 21 |
| Материал | housing: ABS orange; upper part of the housing: PPSU black; sealing: EPDM |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Tightening torque [Nm] | 0.5; (screws) |
| Display | Switching status: 1 x LED, yellow; Power: 1 x LED, green |
| Remarks | cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M8; coding: A; Contacts: 4 |