ifm electronic gmbh O7P201
Retro-reflective sensor, O7P-HPKG/0,20M/AS
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular |
| Special feature | polarization filter |
| Function principle | Retro-reflective sensor |
| Application | For applications in robotics, assembly and handling technology |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | 20; ((24 V)) |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 633 |
| Electrical design | PNP |
| Output function | light-on mode |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 1000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Range referred to prismatic reflector [m] | 0.03...1; (Prismatic reflector Ø 80 E20005; Prismatic reflector 50 x 50 mm E21299) |
| Range adjustable | no |
| Max. light spot diameter [mm] | 55 |
| Light spot dimensions refer to | at maximum range |
| Polarization filter available | yes |
| Рабочая температура | -25...60 |
| Protection | IP 65 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 1155 |
| Масса | 14.4 |
| Dimensions [mm] | 20.3 x 15 x 9 |
| Материал | housing: PA |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Tightening torque [Nm] | 0.5 |
| Display | Switching status: 1 x LED, yellow |
| Remarks | UL - Class 2 source required |
| Pack quantity | 1 pcs. |
| Cable | 0.2 m, PUR; 3 x 0.14 mm² |
| Connector | 1 x M8; coding: A; Contacts: 3; Locking: snap-fit |