ifm electronic gmbh OBF501
Fiber-optic amplifier, OBF-FAKG/T/AS
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular |
| Special feature | Function check output |
| Design | Fiber optic amplifiers for acrylic fibers, Type OBF |
| Application | High switching frequency for fast processes |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 630 |
| Electrical design | PNP/NPN; (Automatic load detection PNP/NPN) |
| Output function | light-on/dark-on mode; (programmable) |
| Напряжение питания | 2.5 |
| Function check output | yes |
| Напряжение питания | 2.5 |
| Max. current load for function check output [mA] | 10 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 3000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Time function [s] | 0.001...0.09 |
| Range [m] | 0...2; (Through-beam sensor) |
| Range [mm] | 0...100; (Diffuse reflection sensor) |
| Range adjustable | yes |
| Рабочая температура | -25...60 |
| Protection | IP 65 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 806 |
| Масса | 48.35 |
| Type of mounting | Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions [mm] | 36 x 15 x 60 |
| Number of channels | 1 |
| Материал | housing: PPE modified |
| Display | Switching status: 1 x LED, yellow; Power: 1 x LED, green; Unsafe zone: 1 x LED, red; Excess gain: 4 x LED, green |
| Remarks | light-on mode corresponds to the NC output function for through-beam fibers; corresponds to the NO output function for diffuse-reflection fibers; dark-on mode corresponds to the NO output function for through-beam fibers; corresponds to the NC output function for diffuse-reflection fiber optics; cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M8; coding: A; Contacts: 4 |