ifm electronic gmbh OGE282
Through-beam sensor receiver, OGE-DNKG/US/CUBE
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular with M18 thread |
| Function principle | Through-beam sensor |
| Application | Industrial applications |
| Напряжение питания | 10...30 DC |
| Current consumption [mA] | 16 |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 662 |
| Electrical design | NPN |
| Output function | dark-on mode |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 200 |
| Switching frequency DC [Hz] | 1000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Transmitter / receiver | receiver |
| Range [m] | < 20 |
| Range adjustable | no |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Multiple switching signal; Function: Device diagnosis; Function: Teach channel |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 2.5 |
| IO-Link process data (cyclical) | Function: bit length; device status: 4; binary switching information: 1 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; switching cycles counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1137 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -25...60 |
| Storage temperature [°C] | -40...60 |
| Protection | IP 65; IP 67 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 961 |
| UL approval | Ta: -25...60 °C; Enclosure type: Type 1; voltage supply: Class 2; File number UL: E174191 |
| Масса | 59.5 |
| Dimensions [mm] | 52.6 x 19 x 36 |
| Thread designation | M18 x 1 |
| Материал | housing: diecast zinc; rear of the housing: PEI |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Display | Switching status: 1 x LED, yellow; Power: 1 x LED, green |
| Items supplied | lock nut: 1 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |