ifm electronic gmbh OGS280
Through-beam sensor transmitter, OGS-OOKG/US/CUBE
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Housing | rectangular with M18 thread |
| Function principle | Through-beam sensor |
| Application | Industrial applications |
| Напряжение питания | 10...30 DC; (cULus - Class 2 source required) |
| Напряжение питания | 32 |
| Current consumption [mA] | 17 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 300 |
| Wave length [nm] | 662 |
| Transmitter / receiver | transmitter |
| Range [m] | 20 |
| Max. light spot diameter [mm] | 800 |
| Light spot dimensions refer to | at maximum range |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Common - I&D: Identification and Diagnosis |
| SIO mode | no |
| Required master port class | A |
| Min. process cycle time [ms] | 2.5 |
| IO-Link process data (cyclical) | Function: bit length; device status: 4 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1135 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -25...60 |
| Storage temperature [°C] | -40...60 |
| Protection | IP 65; IP 67 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 1011 |
| UL approval | Ta: -25...60 °C; Enclosure type: Type 1; voltage supply: Class 2; File number UL: E174191 |
| Масса | 59.5 |
| Dimensions [mm] | 52.6 x 19 x 36 |
| Thread designation | M18 x 1 |
| Материал | housing: diecast zinc; rear of the housing: PEI |
| Материал | front lens:PMMA |
| Lens alignment | Side sensing |
| Display | Power: 1 x LED, green |
| Items supplied | lock nut: 1 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |