ifm electronic gmbh OPU207
Photoelectric fork sensor, OPU-FNKG/IO-LINK/AS
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Напряжение питания | 10...30 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | < 30 |
| Protection class | III |
| Reverse polarity protection | yes |
| Wave length [nm] | 660 |
| Electrical design | NPN |
| Output function | light-on/dark-on mode; (selectable) |
| Напряжение питания | 1 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 5000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Diameter of the smallest detectable object [mm] | 0.3 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Multiple switching signal; Function: Process data variable; Function: Device diagnosis; Function: Teach channel |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 3.2 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1103 |
| Рабочая температура | -25...60 |
| Protection | IP 67 |
| EMC | EN 60947-5-2 |
| MTTF [years] | 709 |
| Масса | 75 |
| Dimensions [mm] | 40 x 10 x 50 |
| Fork depth D [mm] | 25 |
| Fork width W [mm] | 20 |
| Материал | housing: diecast zinc black anodized; lens: glass |
| Display | Switching status: 1 x LED, yellow |
| Remarks | cULus - Class 2 source required |
| Pack quantity | 1 pcs. |
| Connector | 1 x M8; coding: A; Contacts: 3 |