ifm electronic gmbh OPU700
Photoelectric fork sensor, OPULFPKG/IO-Link/AS
Категории:
Технические характеристики
| Type of light | red light |
|---|---|
| Laser protection class | 1 |
| Function principle | Through-beam sensor |
| Напряжение питания | 10...30 DC; (cULus - Class 2 source required) |
| Insulation rating [V] | 500 |
| Current consumption [mA] | < 30 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 150 |
| Wave length [nm] | 655 |
| Electrical design | PNP/NPN; (configurable) |
| Output function | light-on/dark-on mode; (selectable) |
| Напряжение питания | 1 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | 5000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Diameter of the smallest detectable object [mm] | 0.05 |
| Repeatability [mm] | 0.01 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Multiple switching signal; Function: Process data variable; Function: Device diagnosis; Function: Teach channel |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 3.2 |
| IO-Link process data (cyclical) | Function: bit length; process value: 16; device status: 4; binary switching information: 1 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; switching cycles counter; Min./Max. Signalspeicher; Operating mode |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1209 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -25...60 |
| Protection | IP 67 |
| EMC | DIN EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated: 10 V/m; DIN EN 61000-4-4 Burst: 2 kV; DIN EN 61000-4-6 HF conducted: 10 V; DIN EN 55011: class A |
| Vibration resistance | EN 60068-2-6 Fc: (10-55) Hz 1 mm amplitude, vibration duration 5 min., 30 min. per axis with resonance or 55 Hz |
| Shock resistance | EN 60068-2-27 Ea: 30 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
| Notes on laser protection | Caution:: Laser light; laser class:: 1; EN / IEC60825-1:2007; EN / IEC60825-1:2014; Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
| MTTF [years] | 548 |
| Масса | 81.5 |
| Dimensions [mm] | 50 x 10 x 60 |
| Fork depth D [mm] | 35 |
| Fork width W [mm] | 30 |
| Материал | housing: diecast zinc powder-coated; lens: glass |
| Display | Switching status: 1 x LED, yellow |
| Pack quantity | 1 pcs. |
| Connector | 1 x M8; coding: A; Contacts: 3 |