ifm electronic gmbh PI2303
Flush pressure sensor with display, PI-025-REZ02-MFRKG/US/ /P
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
|---|---|
| Measuring range | -1...25 bar: -14.4...362.7 psi: -0.1...2.5 MPa |
| Process connection | Clamp DN50 (2") DIN 32676 (ISO 2852) |
| Special feature | gold-plated contacts |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -20...200; (-20...90 < 0 bar) |
| Min. burst pressure | 150 bar: 2175 psi: 15 MPa |
| Pressure rating | 80 bar: 1160 psi: 8 MPa |
| Type of pressure | relative pressure; vacuum |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Напряжение питания | 18...32 DC |
| Current consumption [mA] | < 45 |
| Power-on delay time [s] | 0.5 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20, invertible; (scalable) |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Max. load [Ω] | (Ub - 10 V) / 20 mA |
| Напряжение питания | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | 125 |
| Set point SP | -0.96...25 bar: -13.8...362.7 psi: -0.096...2.5 MPa |
| Reset point rP | -1...24.96 bar: -14.4...362.1 psi: -0.1...2.496 MPa |
| Analog start point | -1...18.74 bar: -14.4...271.8 psi: -0.1...1.874 MPa |
| Analog end point | 5.24...25 bar: 76.2...362.7 psi: 0.524...2.5 MPa |
| In steps of | 0.02 bar: 0.3 psi: 0.002 MPa |
| Factory setting | SP1 = 6.24 bar: rP1 = 5.74 bar; SP2 = 18.74 bar: rP2 = 18.24 bar; ASP = 0.00 bar: AEP = 25.00 bar |
| Switch point accuracy [% of the span] | < ± 0,2; (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Zero-point stabilization [% of the span] | IO-Link, analog output: 0,15; Display, Switching output: 0,2 |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (0...200 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,15; (0...200 °C) |
| Damping process value dAP [s] | 0...30 |
| Damping for the analog output dAA [s] | 0.01...99.99 |
| Время отклика | 7 |
| Время отклика | 3 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| SDCI standard | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 2.3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 156 |
| Рабочая температура | -25...65 |
| Рабочая температура | Medium temperature: ≤ 200 °C |
| Storage temperature [°C] | -25...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 142 |
| Note on approval | Including free 6-point calibration certificate. |
| Масса | 1199.2 |
| Housing | tubular |
| Dimensions [mm] | Ø 50 / L = 163 |
| Материал | stainless steel (1.4404 / 316L); stainless steel (1.4435 / 316L); PBT; PEI; PFA |
| Материал | stainless steel (1.4435 / 316L) |
| Min. pressure cycles | 10 million |
| Suitable for process connections in accordance with the standards | DIN 32676 series A (DIN): clamp DN50; DIN 32676 series C (ASME BPE): clamp 2"; ISO 2852: clamp DN51 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.38 µm |
| Fill fluid for pressure transfer | NEOBEE (food grade, FDA compliant) |
| Diaphragm diameter [mm] | 47.5 |
| Display | Display unit: LED, green; Switching status: LED, yellow; Function display: alphanumeric display, 4-digit; Measured values: alphanumeric display, 4-digit |
| Display unit | bar; psi; MPa; % of the span |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |