ifm electronic gmbh PL1323
Flush pressure transmitter, PL-060-REG12-A-DKG/US/ /
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
|---|---|
| Measuring range | -25...110 °C: -13...230 °F |
| Process connection | threaded connection G 1/2 external thread - 14 mm |
| Special feature | gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Temperature monitoring | yes |
| Application | Industrial flush pressure transmitters, analog | PL; for industrial applications |
| Media | viscous media and liquids with suspended particles; Liquids; other media on request |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature [°C] | -15...110; (max. -25...110°C; for permissible temperatures of other sealing materials, see “Accessories”) |
| Min. burst pressure | 340 bar: 4930 psi: 34 MPa |
| Pressure rating | 240 bar: 3480 psi: 24 MPa |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure |
| No dead space | yes |
| Напряжение питания | 9.6...30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Current consumption [mA] | < 30 |
| Power-on delay time [s] | < 0.5 |
| Total number of outputs | 2 |
| Output signal | analog signal; IO-Link |
| Number of digital outputs | 1; (IO-Link) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable; 1:5) |
| Max. load [Ω] | (Ub - 9,6 V) / 21,5 mA; 670 Ω (Ub = 24 V) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Analog start point | 0...48 bar: 0...696 psi: 0...4.8 MPa |
| Analog end point | 12...60 bar: 174...870 psi: 1.2...6 MPa |
| In steps of | 0.01 bar: 1 psi: 0.001 MPa |
| Factory setting | ASP = 0.0 bar: AEP = 60.0 bar; ASP = 0.0 MPa: AEP = 6 MPa; ASP = 0.0 psi: AEP = 870 psi |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,8; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Zero-point stabilization [% of the span] | 0,15; (IO-Link; analog output; (see operating instructions zero-point behavior)) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,1 (-25...85 °C) < ± 0,3 (85...110 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,1 (-25...85 °C) < ± 0,3 (85...110 °C) |
| Accuracy [K] | ± 2 + (0,045 x ( Ambient temperature - Medium temperature )) |
| Repeatability [K] | ± 0,2 |
| Damping process value dAP [s] | 0...99.99 |
| Damping for the analog output dAA [s] | 0...99.99 |
| Время отклика | 3 |
| Dynamic response T05 / T09 [s] | < 10 / <45; (DIN EN 60751 water; > 0,9 m/s) |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D: Identification and Diagnosis; Function: Measurement data, standard resolution |
| SIO mode | no |
| Required master port class | A; (when pin 2 not connected: B) |
| Min. process cycle time [ms] | 3.5 |
| IO-Link resolution pressure [bar] | 0.01 |
| IO-Link resolution temperature [K] | 0.2 |
| IO-Link process data (cyclical) | Function: bit length; pressure: 16; temperature: 16; device status: 4 |
| IO-Link functions (acyclical) | application specific tag; internal temperature |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1433 |
| Рабочая температура | -25...90 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 68; IP 69 |
| EMC | DIN EN 61326-1 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 407 |
| Embedded software included | yes |
| UL approval | UL approval number: J057; File number UL: E174189 |
| Embedded software developed in accordance with | ISO 13849-1 : 2015 (clause 4.6.2) |
| Масса | 141 |
| Housing | tubular |
| Dimensions [mm] | Ø 30 / L = 63 |
| Материал | stainless steel (1.4435 / 316L); stainless steel (1.4404 / 316L); PA; PTFE; FKM |
| Материал | stainless steel (1.4435 / 316L); Al2O3 (ceramics) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PTFE; (FKM for sealing with seal DIN EN ISO 1179-2, see operating instructions) |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 25 |
| Display | operating status: 2 LED, green |
| Items supplied | Gasket: G1/2, FKM DIN EN ISO1179-2 (-15...110°C), E30492 |
| Accessories (optional) | Gasket: G1/2, EPDM DIN EN ISO1179-2 (-25...110°C), E30451; Gasket: G1/2, FFKM DIN EN ISO1179-2 (-5...110°C), E30513 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |