ifm electronic gmbh PM1143
Flush pressure sensor, PM-040-REZ01-E-ZVG/US
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
|---|---|
| Measuring range | -1...40 bar: -14.6...580 psi: -0.1...4 MPa |
| Process connection | Clamp DN25...DN40 (1...1,5") DIN 32676 (ISO 2852) |
| Special feature | gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Temperature monitoring | no |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature [°C] | -25...150 |
| Min. burst pressure | 150 bar: 2175 psi: 15 MPa |
| Pressure rating | 125 bar: 1800 psi: 12.5 MPa |
| Note on pressure rating | take into account the pressure resistance of the bracket and the seal used for clamp connection |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure; vacuum |
| No dead space | yes |
| MAWP (for applications according to CRN) | 40 bar: 4 MPa |
| Напряжение питания | 18...30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Current consumption [mA] | < 45 |
| Power-on delay time [s] | 0.5 |
| Total number of outputs | 2 |
| Output signal | analog signal; IO-Link; (configurable) |
| Number of digital outputs | 1; (IO-Link) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Analog start point | -1...32 bar: -14.6...464.2 psi: -0.1...3.2 MPa |
| Analog end point | 7...40 bar: 101.4...580.2 psi: 0.7...4 MPa |
| In steps of | 0.02 bar: 0.2 psi: 0.002 MPa |
| Factory setting | ASP = 0.0 bar: AEP = 40.0 bar |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Total deviation over temperature range | Temperature range: total deviation; -25...15 °C: Characteristics deviation ± 0,05 % of the span / 10 K; 15...80 °C: Characteristics deviation; 80...150 °C: Characteristics deviation ± 0,1 % of the span / 10 K |
| Notes on the accuracy / deviation | for further details see section Diagrams and graphs |
| Damping for the analog output dAA [s] | 0...4 |
| Время отклика | 7 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis |
| SIO mode | no |
| Required master port class | A |
| Process data analog | 3 |
| Min. process cycle time [ms] | 3.2 |
| IO-Link resolution pressure [bar] | 0.01 |
| IO-Link process data (cyclical) | Function: bit length; pressure: 16; device status: 4 |
| IO-Link functions (acyclical) | application specific tag; internal temperature |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1641 |
| Рабочая температура | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 320 |
| Note on approval | Factory certificate available as download at www.factory-certificate.ifm |
| UL approval | UL approval number: J054; File number UL: E174189 |
| Масса | 391.7 |
| Housing | tubular |
| Dimensions [mm] | Ø 30.2 / L = 111.4 |
| Материал | stainless steel (1.4404 / 316L); PBT |
| Материал | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PTFE |
| Min. pressure cycles | 100 million |
| Suitable for process connections in accordance with the standards | DIN 32676 Reihe A (DIN): clamp DN25, DN32, DN40; DIN 32676 Reihe B (ISO): clamp DN26,9, DN33,7; DIN 32676 Reihe C (ASME BPE): clamp 1", 1,5"; ISO 2852: clamp DN25, DN33,7, DN38 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |