ifm electronic gmbh PM1514
Flush pressure sensor, PM-016-REA12-A-ZVG/US
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
|---|---|
| Measuring range | -25...150 °C: -13...302 °F |
| Process connection | threaded connection G 1/2 external thread sealing cone - 34,5 mm |
| Special feature | gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Temperature monitoring | yes |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Conditionally suitable for | use in gases at pressures > 25 bar only on request |
| Medium temperature [°C] | -25...150 |
| Min. burst pressure | 250 bar: 3625 psi: 25 MPa |
| Pressure rating | 110 bar: 1600 psi: 11 MPa |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure; vacuum |
| No dead space | yes |
| MAWP (for applications according to CRN) [bar] | 43 |
| Напряжение питания | 18...30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Current consumption [mA] | < 45 |
| Power-on delay time [s] | < 0.5 |
| Total number of outputs | 2 |
| Output signal | analog signal; IO-Link; (configurable) |
| Number of digital outputs | 1; (IO-Link) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable; 1:5) |
| Max. load [Ω] | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Analog start point | -1...12.8 bar: -14.6...185.6 psi: -0.1...1.28 MPa |
| Analog end point | 2.2...16 bar: 32...232 psi: 0.22...1.6 MPa |
| In steps of | 0.01 bar: 0.2 psi: 0.001 MPa |
| Factory setting | ASP = 0.0 bar: AEP = 16.0 bar |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Zero-point stabilization [% of the span] | IO-Link, analog output: 0,15; (see operating instructions zero-point behavior) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Total deviation over temperature range | Temperature range: total deviation; -25...15 °C: Characteristics deviation ± 0,05 % of the span / 10 K; 15...80 °C: Characteristics deviation; 80...150 °C: Characteristics deviation ± 0,1 % of the span / 10 K |
| Notes on the accuracy / deviation | for further details see section Diagrams and graphs |
| Accuracy [K] | ± 2.5 K + (0.045 x (ambient temperature - medium temperature)) |
| Repeatability [K] | ± 0,2 |
| Resolution [K] | 0.2 |
| Damping for the analog output dAA [s] | 0...4 |
| Время отклика | 7 |
| Dynamic response T05 / T09 [s] | < 10 / < 45; (DIN EN 60751 water; > 0,9 m/s) |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D: Identification and Diagnosis; Function: Measurement data, standard resolution |
| SIO mode | no |
| Required master port class | A; (when pin 2 not connected: B) |
| Min. process cycle time [ms] | 4.5 |
| IO-Link resolution pressure [bar] | 0.005 |
| IO-Link resolution temperature [K] | 0.2 |
| IO-Link process data (cyclical) | Function: bit length; pressure: 16; temperature: 16; device status: 4 |
| IO-Link functions (acyclical) | application specific tag; internal temperature |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1020 |
| Рабочая температура | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | DIN EN 61326-1 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 322 |
| UL approval | UL approval number: J024; File number UL: E174189 |
| Масса | 306.1 |
| Housing | tubular |
| Dimensions [mm] | Ø 30.2 / L = 129.3 |
| Материал | stainless steel (1.4404 / 316L); PTFE; FKM |
| Материал | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PEEK; PTFE |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 25 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |