PM1608

ifm electronic gmbh PM1608

Flush pressure sensor, PM-,25BREA01-E-ZVG/US

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): PM1608
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Measuring range-0.0125...0.25 bar: -12.5...250 mbar: -0.182...3.626 psi: -1.25...25 kPa
Process connectionthreaded connection G 1 external thread sealing cone - 27 mm
Special featuregold-plated contacts
Measuring elementceramic-capacitive pressure measuring cell
Temperature monitoringno
Applicationflush mountable for the food and beverage industry
Mediaviscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]-25...150
Min. burst pressure30000 mbar: 435 psi: 3000 kPa
Pressure rating6000 mbar: 84 psi: 600 kPa
Vacuum resistance-1000 mbar: -0.1 MPa
Type of pressurerelative pressure
No dead spaceyes
MAWP (for applications according to CRN) [bar]10
Напряжение питания18...30 DC
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Integrated watchdogyes
Current consumption [mA]< 45
Power-on delay time [s]0.5
Total number of outputs2
Output signalanalog signal; IO-Link; (configurable)
Number of digital outputs1; (IO-Link)
Number of analog outputs1
Analog current output [mA]4...20; (scalable)
Max. load [Ω]700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA)
Short-circuit proofyes
Overload protectionyes
Analog start point-12.5...200 mbar: -0.182...2.9 psi: -1.25...20 kPa
Analog end point37.5...250 mbar: 0.544...3.626 psi: 3.75...25 kPa
In steps of0.1 mbar: 0.002 psi: 0.01 kPa
Factory settingASP = 0.0 bar: AEP = 250 mbar
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]< ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)
Linearity deviation [% of the span]< ± 0,15; (Turn down 1:1)
Hysteresis deviation [% of the span]< ± 0,15; (Turn down 1:1)
Long-term stability [% of the span]< ± 0,1; (Turn down 1:1; per year)
Total deviation over temperature rangeTemperature range: total deviation; -25...15 °C: Characteristics deviation ± 0,1 % of the span / 10 K; 15...80 °C: Characteristics deviation; 80...150 °C: Characteristics deviation ± 0,15 % of the span / 10 K
Notes on the accuracy / deviationfor further details see section Diagrams and graphs
Damping for the analog output dAA [s]0...4
Время отклика7
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis
SIO modeno
Required master port classA
Process data analog3
Min. process cycle time [ms]3.2
IO-Link resolution pressure [mbar]0.05
IO-Link process data (cyclical)Function: bit length; pressure: 16; device status: 4
IO-Link functions (acyclical)application specific tag; internal temperature
Supported DeviceIDsType of operation: DeviceID; default: 669
Рабочая температура-25...80
Storage temperature [°C]-40...100
ProtectionIP 67; IP 68; IP 69K
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27: 50 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]323
Note on approvalFactory certificate available as download at www.factory-certificate.ifm
UL approvalUL approval number: J022
Масса304.8
Housingtubular
Dimensions [mm]Ø 30.2 / L = 122
Материалstainless steel (1.4404 / 316L); PBT
Материалceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PTFE
Min. pressure cycles100 million
Tightening torque [Nm]20
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции