PM1789

ifm electronic gmbh PM1789

Flush pressure sensor, PM-,10BREA01-E-ZVG/US

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): PM1789
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 1; Number of analog outputs: 1
Measuring range-0.005...0.1 bar: -5...100 mbar: -0.073...1.45 psi: -0.5...10 kPa
Process connectionthreaded connection G 1 external thread with Aseptoflex Vario sealing contour
NoteG1 Gewinde nach ISO 228. Alternativ dichtend über rückwärtige Dichtkontur mit Dichtung in Anlehnung an DIN EN ISO 1179-2.
Special featuregold-plated contacts
Measuring elementceramic-capacitive pressure measuring cell
Temperature monitoringno
Applicationflush mountable for the food and beverage industry
Mediaviscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]-25...150
Min. burst pressure30000 mbar: 435 psi: 3000 kPa
Pressure rating4000 mbar: 58 psi: 400 kPa
Vacuum resistance [mbar]-1000
Type of pressurerelative pressure
No dead spaceyes
MAWP (for applications according to CRN) [bar]4
Напряжение питания18...30 DC
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Integrated watchdogyes
Current consumption [mA]< 45
Power-on delay time [s]0.5
Total number of outputs2
Output signalanalog signal; IO-Link; (configurable)
Number of digital outputs1; (IO-Link)
Number of analog outputs1
Analog current output [mA]4...20; (scalable)
Max. load [Ω]700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA)
Short-circuit proofyes
Overload protectionyes
Analog start point-5...80 mbar: -0.073...1.16 psi: -0.5...8 kPa
Analog end point15...100 mbar: 0.218...1.45 psi: 1.5...10 kPa
In steps of0.05 mbar: 0.001 psi: 0.005 kPa
Factory settingASP = 0.0 mbar: AEP = 100 mbar
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]< ± 0,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1)
Linearity deviation [% of the span]< ± 0,25; (Turn down 1:1)
Hysteresis deviation [% of the span]< ± 0,2; (Turn down 1:1)
Long-term stability [% of the span]< ± 0,1; (Turn down 1:1; per year)
Total deviation over temperature rangeTemperature range: total deviation; -25...15 °C: Characteristics deviation ± 0,15 % of the span / 10 K; 15...80 °C: Characteristics deviation; 80...150 °C: Characteristics deviation ± 0,2 % of the span / 10 K
Notes on the accuracy / deviationfor further details see section Diagrams and graphs
Damping for the analog output dAA [s]0...4
Время отклика7
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis
SIO modeno
Required master port classA
Process data analog3
Min. process cycle time [ms]3.2
IO-Link resolution pressure [mbar]0.02
IO-Link functions (acyclical)application specific tag; internal temperature
Supported DeviceIDsType of operation: DeviceID; default: 670
Рабочая температура-25...80
Storage temperature [°C]-40...100
ProtectionIP 67; IP 68; IP 69K
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27: 50 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]323
Note on approvalFactory certificate available as download at www.factory-certificate.ifm
UL approvalUL approval number: J021
Масса272.15
Housingtubular
Dimensions [mm]Ø 30.2 / L = 111
Материалstainless steel (1.4404 / 316L); PBT
Материалceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; PTFE
Min. pressure cycles100 million
Tightening torque [Nm]35
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции