PN7012

ifm electronic gmbh PN7012

Pressure sensor with display, PN-160-SER14-QFRKG/US/ /V

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): PN7012
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 2
Measuring range0...160 bar: 0...2322 psi: 0...16 MPa
Process connectionthreaded connection G 1/4 Internal thread
Special featuregold-plated contacts
Measuring elementceramic-capacitive pressure measuring cell
Applicationfor industrial applications
Medialiquids and gases
Conditionally suitable foruse in gases at pressures > 25 bar only on request
Medium temperature [°C]-25...80
Min. burst pressure750 bar: 10900 psi: 75 MPa
Pressure rating350 bar: 5100 psi: 35 MPa
Vacuum resistance-1000 mbar: -0.1 MPa
Type of pressurerelative pressure
Напряжение питания18...30 DC; (to SELV/PELV)
Current consumption [mA]< 35
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]< 0.3
Integrated watchdogyes
Total number of outputs2
Output signalswitching signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / closed; (configurable)
Напряжение питания2.5
Permanent current rating of switching output DC [mA]150; (200 (...60 °C) 250 (...40 °C))
Switching frequency DC [Hz]< 170
Short-circuit protectionyes
Type of short-circuit protectionyes (non-latching)
Overload protectionyes
Set point SP1.3...160 bar: 19...2321 psi: 0.13...16 MPa
Reset point rP0.5...159.2 bar: 7...2309 psi: 0.05...15.92 MPa
Min. difference between SP and rP0.8 bar: 12 psi: 0.08 MPa
In steps of0.1 bar: 1 psi: 0.01 MPa
Switch point accuracy [% of the span]< ± 0,5
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation [% of the span]< ± 0,25
Long-term stability [% of the span]< ± 0,05; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]< ± 0,2; (0...80 °C)
Temperature coefficient span [% of the span / 10 K]< ± 0,2; (0...80 °C)
Время отклика< 3
Delay time programmable dS, dr [s]0...50
Damping process value dAP [s]0...4
Parameter setting optionshysteresis / window; normally open / closed; switching logic; switch-on/switch-off delay; Damping; Display unit
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis
SIO modeyes
Required master port classA; (when pin 2 not connected: B)
Min. process cycle time [ms]3
IO-Link resolution pressure [bar]0.05
IO-Link process data (cyclical)Function: bit length; pressure: 16; device status: 4; binary switching information: 2
IO-Link functions (acyclical)application specific tag
Supported DeviceIDsType of operation: DeviceID; default: 1196
NoteFor further information please see the IODD PDF file at "Downloads"
Рабочая температура-25...80
Storage temperature [°C]-40...100
ProtectionIP 65; IP 67
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27: 50 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: 20 g (10...2000 Hz)
MTTF [years]249
UL approvalUL approval number: J039; File number UL: E174189
Pressure equipment directivesound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Масса280
Housingtubular
Dimensions [mm]Ø 34 / L = 90.7
Материалstainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
Материалstainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM
Min. pressure cycles100 million
Tightening torque [Nm]25...35; (recommended tightening torque; Depends on lubrication, seal and pressure rating)
Restrictor element integratedno (can be retrofitted)
DisplayDisplay unit: 3 x LED, green (bar, psi, MPa); Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green 4-digit
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции