ifm electronic gmbh PQC829
Pressure sensor for pneumatics, PQ-0-1B-KHR18-MFPKG/US/
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
|---|---|
| Measuring range | -1...0 bar: -1000...0 mbar: -14.5...0 psi: -100...0 kPa |
| Process connection | threaded connection G 1/8 Internal thread (2x) |
| Special feature | gold-plated contacts |
| Application | for industrial applications |
| Media | compressed air; nitrogen (N2) |
| Conditionally suitable for | other media on request |
| Medium temperature | 0...60 °C: 32...140 °F |
| Min. burst pressure | 20 bar: 290 psi: 2 MPa |
| Pressure rating | 10 bar: 145 psi: 1 MPa |
| Vacuum resistance | -1000 mbar: -14.5 psi: -0.1 MPa |
| Type of pressure | relative pressure; vacuum |
| Напряжение питания | 18...30 DC |
| Current consumption [mA] | < 30 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.3 |
| Integrated watchdog | yes |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN; (configurable) |
| Number of digital outputs | 1 |
| Output function | normally open / closed; (configurable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 100 |
| Switching frequency DC [Hz] | < 170 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20, invertible; (scalable) |
| Max. load [Ω] | 500 |
| Напряжение питания | 0...10 / 1...5, invertible; (scalable) |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Set point SP | -1...0 bar: -14.5...0 psi: -100...0 kPa |
| Analog start point | -1...-0.2 bar: -14.5...-2.9 psi: -100...-20 kPa |
| Analog end point | -0.8...0 bar: -11.6...0 psi: -80...0 kPa |
| In steps of | 0.001 bar: 0.01 psi: 0.1 kPa |
| Switch point accuracy [% of the span] | < ± 1; (Turn down 1:1) |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K: Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 1; (Turn down 1:1; including linearity, hysteresis and repeatability) |
| Linearity deviation [% of the span] | < ± 1 % (limit value setting to DIN EN IEC 62828-1) |
| Hysteresis deviation [% of the span] | < ± 0,25; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point [% of the span / 10 K] | 0,2; (Turn down 1:1) |
| Temperature coefficient span [% of the span / 10 K] | 0,2; (Turn down 1:1) |
| Время отклика | 6 |
| Damping process value dAP [s] | 0...4 |
| Damping for the analog output dAA [s] | 0...99.99 |
| Parameter setting options | display can be rotated and switched off; analog output selectable and scalable; Teach function; simulation function; Diagnostic function |
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2019-06 |
| Profiles | Smart Sensor - SSP 4.1.1: Measuring and Switching Sensor, 1 channel; BLOB: Binary Large Object transfer; Common - I&D: Identification and Diagnosis; Extension: Quantity detection, switches when value exceeds the setpoint; Function: Locator; Function: ProductURI |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 1 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 0.6 |
| IO-Link resolution pressure [bar] | 0.0001 |
| IO-Link process data (cyclical) | Function: bit length; pressure: 16; device status: 4; SSC1.1: 1; SSC1.2: 1 |
| IO-Link functions (acyclical) | application specific tag; internal temperature; Medium temperature |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1730 |
| Рабочая температура | 0...60 °C: 32...140 °F |
| Storage temperature | -25...85 °C: -13...185 °F |
| Protection | IP 65 |
| EMC | DIN EN 61326-1 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| UL approval | UL approval number: J068; File number UL: E174189 |
| Pressure equipment directive | sound engineering practice; can be used for stable gases fluid group 2 |
| Масса | 60.228 |
| Housing | rectangular |
| Dimensions [mm] | 37.7 x 30 x 38.6 |
| Материал | PBT; PC; TPE; NBR; FKM; brass; silicon (coated) |
| Материал | PBT; FKM; brass; silicon (coated) |
| Min. pressure cycles | 50 million |
| Display | Display 1": 128 x 96 pixels; Switching status: 1 x LED, yellow |
| Display unit | mbar; kPa; psi; mmHg; inHg; kgf/cm²; % |
| Items supplied | head cap screw: 2 x (M3 x 8 mm) |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |