Датчики давления
PT0504

ifm electronic gmbh PT0504

Датчики давления ifm electronic gmbh PT0504. Подбор по артикулу, поставка под заказ: цену и срок уточняйте через запрос на поставку.

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): PT0504
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of analog outputs: 1
Measuring range0...10 bar: 0...145 psi: 0...1000 kPa: 0...1 MPa
Process connectionthreaded connection G 1/4 external thread (DIN EN ISO 1179-2)
Applicationfor industrial applications
Medialiquids and gases
Medium temperature [°C]0...80
Min. burst pressure50 bar: 725 psi: 5000 kPa: 5 MPa
Pressure rating20 bar: 290 psi: 2000 kPa: 2 MPa
Type of pressureAbsolute pressure
Напряжение питания8...30 DC
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Total number of outputs1
Output signalanalog signal
Number of analog outputs1
Analog current output [mA]4...20
Max. load [Ω]800; (Ub = 24 V; (Ub - 8 V) / 20 mA)
Short-circuit proofyes
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]< ± 1,0; (incl. zero point and span error, non-linearity, hysteresis)
Linearity deviation [% of the span]< ± 0,5 (BFSL) / < ± 1,0 (LS)
Long-term stability [% of the span]< ± 0,1; (per year)
Temperature coefficient zero point [% of the span / 10 K]< ± 0,2; (0...80 °C)
Temperature coefficient span [% of the span / 10 K]< ± 0,2; (0...80 °C)
Время отклика4
Рабочая температура0...80
Storage temperature [°C]-20...80
ProtectionIP 67
EMCDIN EN 61326-1
Shock resistanceDIN EN 60068-2-27: 500 g (1 ms)
Vibration resistanceDIN EN 60068-2-6: 10 g (10...2000 Hz)
MTTF [years]815
Pressure equipment directivesound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Масса118.35
Housingtubular
Dimensions [mm]Ø 29 / L = 58.8
Материалstainless steel (1.4404 / 316L); HNBR; PA
Материалstainless steel (1.4404 / 316L)
Min. pressure cycles10 million
Tightening torque [Nm]25...35; (recommended tightening torque; Depends on lubrication, seal and pressure rating)
Process connection sealingNBR (DIN EN ISO 1179-2)
Fill fluid for pressure transfersynthetic oil
Restrictor element integratedno
RemarksBFSL = Best Fit Straight Line; LS = limit value setting
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 2
Получить предложение по этой позиции