ifm electronic gmbh PY2006
Flush pressure sensor, PM-2,5-REA01-E-ZVG/US
Категории:
Технические характеристики
| Number of inputs and outputs | Number of analog outputs: 1 |
|---|---|
| Measuring range | -0.125...2.5 bar: -125...2500 mbar: -1.82...36.26 psi: -12.5...250 kPa |
| Process connection | threaded connection G 1 external thread with Aseptoflex Vario sealing contour |
| Note | G1 Gewinde nach ISO 228. Alternativ dichtend über rückwärtige Dichtkontur mit Dichtung in Anlehnung an DIN EN ISO 1179-2. |
| Special feature | gold-plated contacts |
| Measuring element | ceramic-capacitive pressure measuring cell |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature [°C] | -25...85; (125: < 1 h) |
| Min. burst pressure | 50000 mbar: 725 psi: 5000 kPa |
| Pressure rating | 20000 mbar: 290 psi: 2000 kPa |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure |
| No dead space | yes |
| MAWP (for applications according to CRN) [bar] | 20 |
| Напряжение питания | 18...30 DC |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Current consumption [mA] | < 45 |
| Power-on delay time [s] | 0.5 |
| Total number of outputs | 1 |
| Output signal | analog signal; (configurable) |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 700; (Ub = 24 V; (Ub - 9 V) / 21.5 mA) |
| Short-circuit proof | yes |
| Overload protection | yes |
| Analog start point | -125...2000 mbar: -1.82...29 psi: -12.5...200 kPa |
| Analog end point | 375...2500 mbar: 5.44...36.26 psi: -37.5...250 kPa |
| In steps of | 1 mbar: 0.02 psi: 0.1 kPa |
| Factory setting | ASP = 0.0 mbar: AEP = 2500 mbar |
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,2; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Total deviation over temperature range | Temperature range: total deviation; -25...15 °C: Characteristics deviation ± 0,05 % of the span / 10 K; 15...80 °C: Characteristics deviation; 80...125 °C: Characteristics deviation ± 0,1 % of the span / 10 K |
| Notes on the accuracy / deviation | for further details see section Diagrams and graphs |
| Damping for the analog output dAA [s] | 0...4 |
| Время отклика | 7 |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| Profiles | Smart Sensor - SSP 3.1: Measuring Sensor; Common - I&D: Identification and Diagnosis |
| SIO mode | no |
| Required master port class | A |
| Process data analog | 3 |
| Min. process cycle time [ms] | 3.2 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1111 |
| Рабочая температура | -25...80 |
| Storage temperature [°C] | -40...100 |
| Protection | IP 67; IP 68; IP 69K |
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (10...2000 Hz) |
| MTTF [years] | 323 |
| UL approval | UL approval number: J025 |
| Масса | 554.7 |
| Housing | tubular |
| Dimensions [mm] | Ø 34 / L = 186.4 |
| Материал | stainless steel (1.4404 / 316L); stainless steel (1.4301 / 304); PBT |
| Материал | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L) surface characteristics: Ra 0,4 µm / Rz = 4 µm; PTFE |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 35 |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |