ifm electronic gmbh R2D111
radar area sensor, R2DADF6KG/US/IO-LINK
Категории:
Технические характеристики
| Communication interface | IO-Link |
|---|---|
| Housing | rectangular |
| Dimensions [mm] | 80 x 80 x 45 |
| Electrical design | PNP/NPN; (configurable) |
| Output function | normally open / closed; (configurable) |
| Radio approval for | Hong Kong; USA; Canada; Chile; Ecuador |
| Напряжение питания | 10...30 DC; (to SELV/PELV ; energy-limited circuits according to IEC/UL 61010-1 3rd ed. cl. 9.4) |
| Current consumption [mA] | < 300; (mean value: 150 mA) |
| Power consumption [W] | 21; (maximum) |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 1000 |
| Operating frequency [GHz] | 60...64 |
| Radiated peak power EIRP [dBm] | 18 |
| Total number of inputs and outputs | 3 |
| Inputs | IN1: activation/deactivation of the radar |
| Total number of outputs | 2 |
| Output signal | OUT1: switching signal; IO-Link; OUT2: switching signal |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 200 |
| Range [m] | 0.3...20; (based on E23013) |
| Angle of aperture cylindrical [°] | Horizontal: 140; vertical: 50 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Measuring range [m] | 0.3...20; (see diagram:) |
| Sampling rate [Hz] | 20 |
| Parameter setting options | only via IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | BLOB: Binary Large Object transfer; Common - I&D: Identification and Diagnosis; Function: Locator; Function: ProductURI |
| SIO mode | yes |
| Required master port class | A |
| Min. process cycle time [ms] | 3.2 |
| IO-Link process data (cyclical) | Function: bit length; alarm zone status: 8; position X of object 1: 16; position Y of object 1: 16; speed X of object 1: 16; speed Y of object 1: 16; performance of object 1: 8; RCS of object 1: 8; confidence of object 1: 8; position X of object 2: 16; position Y of object 2: 16; speed X of object 2: 16; speed Y of object 2: 16; performance of object 2: 8; RCS of object 2: 8; confidence of object 2: 8; device status: 4; sensor inclination: 1 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; number of trigger events; internal temperature; ROI setting; switch-on delays; transmitter can be switched off |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1777 |
| Рабочая температура | -40...85 |
| Storage temperature [°C] | -40...85 |
| Protection | IP 65; IP 66; IP 67; IP 69K; (with mounted connectors or protective caps) |
| EMC | DIN EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated: 10 V/m; DIN EN 61000-4-4 Burst: 2 kV; DIN EN 61000-4-6 HF conducted: 10 V; DIN EN 61000-6-2: noise immunity / industrial environments; EN 55032 emission: class A |
| Impact resistance | IEC 62262: IK06 (1J) |
| Vibration resistance | DIN EN 60068-2-6 Fc: 10 g 10 frequency cycles, 1 octave/minute, in 3 axes |
| Shock resistance | DIN EN 60068-2-27 Ea: 50 g 11 ms half-sine; 10 shocks each in every direction along the 3 coordinate axes |
| Continuous shock resistance | DIN EN 60068-2-29 Eb: 40 g 6 ms half-sine; 4,000 shocks each in every direction along the 3 coordinate axes |
| Fast temperature changes | DIN EN 60068-2-14 Na: TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 30 s; 300 cycles |
| Salt spray test | DIN EN 60068-2-11 Ka: 8 test cycles |
| Electrical safety | DIN EN 61010-2-201: electric shock / electrical supply only via SELV/PELV circuits |
| MTTF [years] | 53 |
| UL approval | Ta: -40...65 °C; File number UL: E205959 |
| Масса | 401.5 |
| Mounting | flush mountable |
| Материал | housing: PA; radome: PEI; sealing: HNBR |
| Display | Switching status: 2x LED, yellow; Power: 1x LED, green; errors: 1x LED, red |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5 |