ifm electronic gmbh R2D201
radar area sensor, R2DBAOOKG/US/CAN
Категории:
Технические характеристики
| Communication interface | CAN |
|---|---|
| Housing | rectangular |
| Dimensions [mm] | 80 x 80 x 45 |
| Radio approval for | EU/RED; Great Britain; Australia; Mexico; Namibia; New Zealand; South Africa; Hong Kong; USA; Canada; Chile; Brazil; Ecuador; Cameroon; Panama; Morocco; Mongolia; Malaysia; Paraguay; Ukraine |
| Note on radio approval | The list of countries applying the European Radio Equipment Directive 2014/53/EU (RED) can be found under “Downloads”. |
| Напряжение питания | 9...32 DC; (to SELV/PELV ; energy-limited circuits according to IEC/UL 61010-1 3rd ed. cl. 9.4) |
| Current consumption [mA] | < 300; (mean value: 150 mA) |
| Power consumption [W] | 9; (maximum) |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 1000 |
| Operating frequency [GHz] | 77...81 |
| Maximum radiated average power spectral density EIRP [dBm/MHz] | -9 |
| Radiated peak power EIRP [dBm] | 27 |
| Range [m] | 0.1...50; (based on E23014) |
| Angle of aperture cylindrical [°] | Horizontal: 140; vertical: 30 |
| Note | For further information please refer to the software manual available under "Downloads" |
| Measuring range [m] | 0.1...50; (see diagram:) |
| Sampling rate [Hz] | 20 |
| Parameter setting options | via PC with ifm Vision Assistant |
| Number of CAN interfaces | 1 |
| Transmission rate | 250 (125...1000) kBaud |
| Protocol | SAE J1939 |
| Factory settings | Baud rate: 250; device address (ECU): 126; UDS interface: 1000 kBaud |
| Usage type | Parameter setting; Data transmission |
| Рабочая температура | -40...85 |
| Storage temperature [°C] | -40...85 |
| Protection | IP 65; IP 66; IP 67; IP 69K; (with mounted connectors or protective caps) |
| EMC | DIN EN 61000-4-2 ESD: 4 kV CD / 8 kV AD; DIN EN 61000-4-3 HF radiated: 10 V/m; DIN EN 61000-4-4 Burst: 2 kV; DIN EN 61000-4-6 HF conducted: 10 V; DIN EN 61000-6-2: noise immunity / industrial environments; EN 55032 emission: class A |
| Impact resistance | IEC 62262: IK06 (1J) |
| Vibration resistance | DIN EN 60068-2-6 Fc: 10 g 10 frequency cycles, 1 octave/minute, in 3 axes |
| Shock resistance | DIN EN 60068-2-27 Ea: 50 g 11 ms half-sine; 10 shocks each in every direction along the 3 coordinate axes |
| Continuous shock resistance | DIN EN 60068-2-29 Eb: 40 g 6 ms half-sine; 4,000 shocks each in every direction along the 3 coordinate axes |
| Fast temperature changes | DIN EN 60068-2-14 Na: TA = -40°C; TB = 85°C; t1 = 30 min; t2 = < 30 s; 300 cycles |
| Salt spray test | DIN EN 60068-2-11 Ka: 8 test cycles |
| Electrical safety | DIN EN 61010-2-201: electric shock / electrical supply only via SELV/PELV circuits |
| MTTF [years] | 56 |
| UL approval | Ta: -40...65 °C; File number UL: E205959 |
| Масса | 428.3 |
| Mounting | flush mountable |
| Материал | housing: PA; radome: PEI; sealing: HNBR |
| Display | Power: 1x LED, green; errors: 1x LED, red |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 5 |