ifm electronic gmbh RM8004
Absolute multiturn encoder with hollow shaft, RMS0024-C24/USU
Категории:
Технические характеристики
| Resolution | 4096 steps; 4096 revolutions; 24 bit |
|---|---|
| Communication interface | CAN |
| Shaft design | hollow shaft open to one side |
| Shaft diameter [mm] | 12 |
| Function principle | absolute |
| Revolution type | multiturn |
| Напряжение питания | 9...30 DC; (cULus - Class 2 source required) |
| Current consumption [mA] | < 100; ((10 V DC) ; ≤ 50 (24 V DC)) |
| Protection class | III |
| Reverse polarity protection | yes |
| Short-circuit protection | yes |
| Code | binary |
| Accuracy [°] | 0.25 |
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; Direction of rotation; node ID |
| Protocol | CANopen |
| Factory settings | Baud rate: 125 kBit/s; node ID: 32 |
| Version | DSP - 406 V3.1; DS 301 V4.02; DS 306 V2.0 |
| Рабочая температура | -40...85 |
| Max. relative air humidity [%] | 98 |
| Protection | IP 65; (on the housing: IP 65; on the shaft: IP 64) |
| Shock resistance | < 300 g (6 ms) |
| Vibration resistance | 30 g (10...1000 Hz) |
| MTTF [years] | 240 |
| Масса | 235.5 |
| Housing | tubular |
| Dimensions [mm] | Ø 36.5 / L = 74 |
| Материал | flange: aluminum; housing cap: steel powder-coated |
| Max. revolution, mechanical [U/min] | 6000 |
| Max. starting torque [Nm] | 0.03 |
| Reference temperature torque [°C] | 25 |
| Материал | steel |
| Max. shaft load axial (at the shaft end) [N] | 40 |
| Max. shaft load radial (at the shaft end) [N] | 110 |
| Fixing flange | Ø 36.5 mm |
| Display | Preoperational Mode: LED, green; Operational Mode: LED, green flashing; Error message: LED, red flashing |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12, axial; coding: A |