ifm electronic gmbh RMB310
Absolute multiturn encoder with solid shaft, MULTITURN ENCODER WETLINE
Категории:
Технические характеристики
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
|---|---|
| Communication interface | IO-Link |
| Shaft design | solid shaft |
| Shaft diameter [mm] | 10 |
| Function principle | absolute |
| Revolution type | multiturn |
| Detection system | magnetic |
| Напряжение питания | 18...30 DC; (; to PELV) |
| Напряжение питания | 30 |
| Current consumption [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 1000 |
| Max. revolution electrical [U/min] | 6000 |
| Short-circuit protection | yes |
| Accuracy [°] | 0.1 |
| Parameter setting options | preset; Zero point; Direction of rotation; rotational speed |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Common - I&D: Identification and Diagnosis; Function: Multiple switching signal; Function: Measurement data, high resolution |
| SIO mode | no |
| Required master port class | A |
| Min. process cycle time [ms] | 2.3 |
| IO-Link process data (cyclical) | Function: bit length; process value: 96; device status: 4; binary switching information: 5 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; internal temperature; switching cycles counter |
| Supported DeviceIDs | Type of operation: DeviceID; default: 1064 |
| Note | For further information please see the IODD PDF file at "Downloads" |
| Рабочая температура | -40...85 |
| Storage temperature [°C] | -40...85 |
| Max. relative air humidity [%] | 98; (Condensation not permissible) |
| Protection | IP 68; IP 69K |
| EMC | DIN EN 61000-4-2 ESD: 4 kV CD; DIN EN 61000-4-3 HF radiated: 10 V/m; DIN EN 61000-4-4 Burst: 2 kV; DIN EN 61000-4-6 HF conducted: 10 V |
| Vibration resistance | DIN EN 60068-2-6: 30 g / 10...1000 Hz half-sine |
| Shock resistance | DIN EN 60068-2-27: 200 g / 11 ms |
| Continuous shock resistance | DIN EN 60068-2-29: 30 g / 6 ms half-sine |
| MTTF [years] | 283 |
| UL approval | voltage supply: Class 2 |
| Масса | 472.1 |
| Housing | tubular |
| Dimensions [mm] | Ø 42 / L = 107.9 |
| Материал | flange: stainless steel (1.4404 / 316L); housing: stainless steel (1.4404 / 316L) |
| Max. starting torque [Nm] | 0.05 |
| Reference temperature torque [°C] | 20 |
| Материал | stainless steel (1.4112 / 440B) |
| Max. shaft load axial (at the shaft end) [N] | 300 |
| Max. shaft load radial (at the shaft end) [N] | 300 |
| Fixing flange | Synchro-flange |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12, axial; coding: A; Contacts: 5; Moulded body: stainless steel (1.4401 / 316) |