ifm electronic gmbh RMS005
draw wire encoder, DRAW WIRE ENCODER
Категории:
Технические характеристики
| Resolution | 4096 steps; 4096 revolutions; 24 bit |
|---|---|
| Communication interface | CAN |
| Function principle | absolute |
| Detection system | magnetic |
| Application | encoder |
| Напряжение питания | 9...30 DC |
| Current consumption [mA] | 50...100 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time [ms] | 500 |
| Settling time [ms] | 32 |
| Short-circuit proof | yes |
| Code | binary |
| Repeatability | ± 0,001 % FSO |
| Parameter setting options | CAN parameter; scaling; preset; Baud rate; Direction of rotation; node ID |
| Protocol | CANopen |
| Factory settings | Baud rate: 125 kBit/s; node ID: 32 |
| Version | DSP - 406 V3.1; DS 301 V4.02; DS 306 V2.0 |
| Рабочая температура | -20...80 |
| Storage temperature [°C] | -20...80 |
| Max. relative air humidity [%] | 95; (Condensation not permissible) |
| Protection | IP 64; (on the housing: IP 65) |
| MTTF [years] | 240 |
| Масса | 3684.5 |
| Материал | housing: steel; wire drum: aluminum; plastics; wire: stainless steel polyamide coated |
| Max. measuring length [mm] | 10000 |
| Wire drum circumference [mm] | 315 |
| Wire diameter [mm] | 1 |
| Wire connection | Ø 20,2 mm; (eyelet) |
| Wire properties | max. speed of wire displacement: [m /s]: 2; max. wire acceleration: [g]: 6; max. extension force: [N]: 21; max. retraction force: [N]: 8 |
| Display | readiness for operation: LED, green; Operating mode: LED, green flashing; fault: LED, red flashing |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12, can be used radially; coding: A; Contacts: 5 |