ifm electronic gmbh RVP510
Incremental encoder with solid shaft and display, INCREMENTAL ENCODER PERFORMANCE LINE
Категории:
Технические характеристики
| Resolution | 1...10000; (configurable; Factory setting: 1024) resolution |
|---|---|
| Communication interface | IO-Link |
| Shaft design | solid shaft |
| Shaft diameter [mm] | 10 |
| Function principle | incremental |
| Detection system | magnetic |
| Application | encoder; Speed monitor; Counter |
| Напряжение питания | 4.75...30 DC |
| Current consumption [mA] | < 350 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. revolution electrical [U/min] | 12000 |
| Electrical design | HTL/TTL |
| Switching frequency [kHz] | 1000 |
| Factory setting | Output function: HTL (50 mA) |
| Short-circuit protection | yes |
| Phase difference A und B [°] | 90 |
| Set point SP | -9994...9999 U/min: -166.6...166.7 Hz |
| Reset point rP | -9999...9994 U/min: -166.7...166.6 Hz |
| Preset point | 1...9999 |
| Accuracy [°] | 0.1 |
| Parameter setting options | encoder; Resolution; Direction of rotation; HTL; TTL; Speed monitor; Resolution |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Min. process cycle time [ms] | 2.7 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 496 |
| Рабочая температура | -40...85 |
| Storage temperature [°C] | -40...85 |
| Max. relative air humidity [%] | 95; (Condensation not permissible) |
| Protection | IP 65; (on the housing: IP 67; on the shaft: IP 64) |
| Shock resistance | 100 g |
| Vibration resistance | 20 g |
| MTTF [years] | 218 |
| Масса | 429 |
| Housing | tubular |
| Dimensions [mm] | Ø 58 / L = 80.2 |
| Материал | flange: aluminum; housing: stainless steel (1.4521 / 444); display window: PEI |
| Max. revolution, mechanical [U/min] | 12000 |
| Max. starting torque [Nm] | 0.01 |
| Reference temperature torque [°C] | 20 |
| Материал | stainless steel |
| Max. shaft load axial (at the shaft end) [N] | 40 |
| Max. shaft load radial (at the shaft end) [N] | 60 |
| Fixing flange | Clamping flange |
| Display | 10-segment display, red/green 4-digit configurable; 2 x LED, yellow; 5 x LED, green |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12, radial, can also be used axially; coding: A; Moulded body: stainless steel (1.4401 / 316); Maximum cable length: 100 m; (IO-Link: max. 20 m) |