SA4110

ifm electronic gmbh SA4110

Датчик расхода, SAEXXXXBFRKG/US-100

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): SA4110
  • Статус производства: Не определён

Категории:

Технические характеристики

Number of inputs and outputsNumber of digital outputs: 2; Number of analog outputs: 1
Process connectionClamp fitting Ø 8 mm
Special featuregold-plated contacts
Mediawater; glycol solutions; air; oils
Note on medialow-viscosity oils with viscosity: ≤ 40 mm²/s (104 °F); high-viscosity oils with viscosity: > 40 mm²/s (104 °F)
Medium temperature [°F]-4...212
Pressure rating50 bar: 725 psi: 5 MPa
MAWP (for applications according to CRN) [bar]50
Напряжение питания18...30 DC
Current consumption [mA]< 100
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]10
Measuring principlecalorimetric
Total number of outputs2
Output signalswitching signal; analog signal; frequency signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / closed; (configurable)
Напряжение питания2.5
Permanent current rating of switching output DC [mA]250
Number of analog outputs1
Analog current output [mA]4...20; (scalable)
Max. load [Ω]350
Short-circuit protectionyes
Type of short-circuit protectionyes (non-latching)
Overload protectionyes
Frequency of the output [Hz]0...1000
Probe length L [mm]100
Operating moderelative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended; Factory setting: relative)
Measuring range [°F]-4...212
Resolution [°F]0.5
Setting range [ft/s]6...656
Greatest sensitivity [ft/s]6...328
Temperature drift [cm/s x 1/K]0,01 fps x 1/K (< 68 °F; > 158 °F)
Max. temperature gradient of medium [K/min]100
Repeatability0,05 m/s; (water; Flow velocity: 0,05...3 m/s)
Accuracy± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 68...158 °F; inlet length: 5 ft; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Temperature drift± 0,003 K/°F
Accuracy [K]± 0,3 / ± 1; (water; Flow velocity: 1...9,85 fps / air; Flow velocity: > 32,8 fps)
Время отклика0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Dynamic response T05 / T09 [s]1,5 (T09); (water; Flow velocity: 1...9,85 fps)
Parameter setting optionshysteresis / window; normally open / closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value color
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis
SIO modeyes
Required master port classA
Process data analog2
Process data binary2
Min. process cycle time [ms]3
Supported DeviceIDsType of operation: DeviceID; Factory setting / ModE = (REL): 537; ModE = (GAS): 551; ModE = (LIQU): 544
Рабочая температура-40...176
Storage temperature [°F]-40...212
ProtectionIP 65; IP 67
EMCDIN EN 60947-5-9
Shock resistanceDIN EN 60068-2-27: 50 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: 5 g (10...2000 Hz)
MTTF [years]143
UL approvalUL approval number: I017; File number UL: E174189
Масса241.4
Housingtubular
Dimensions [mm]Ø 8 / L = 192
Материалstainless steel (1.4404 / 316L); PBT-GF20; PBT-GF30
Материалstainless steel (1.4404 / 316L)
DisplayDisplay unit: 6 x LED, green (%, fps, gpm, cfm, °F, 10³); Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green 4-digit
RemarksMW = Measured value; MEW = Final value of the measuring range
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции