SB7242

ifm electronic gmbh SB7242

Flow meter with fast response and display, SBG11KL0FRKG

  • Бренд: ifm electronic gmbh
  • Артикул (MPN): SB7242
  • Статус производства: Не определён

Категории:

Технические характеристики

Measuring range-10...100 °C: 14...212 °F
Process connectionthreaded connection G 1 Internal thread
Special featuregold-plated contacts
MediaFlüssige Medien; Öle (Viskosität 320 mm²/s bei 40°C)
Medium temperature [°C]-10...100
Pressure rating100 bar: 10 MPa
Note on pressure ratingat medium temperature >70°C: 80 bar / 8 MPa
MAWP (for applications according to CRN)78 bar: 7.8 MPa
Напряжение питания18...30 DC; (to SELV/PELV ; cULus - Class 2 source required)
Current consumption [mA]< 50
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]< 3
Total number of outputs2
Output signalswitching signal; analog signal; frequency signal; IO-Link
Напряжение питания2
Max. current load per output [mA]150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature)
Analog current output [mA]4...20
Max. load [Ω]500
Short-circuit protectionyes
Overload protectionyes
Frequency of the output [Hz]0...10000
Display range-32...122 °C: -25.6...251.6 °F
Resolution0.1 °C: 0.1 °F
Set point SP-9.3...100 °C: 15.2...212 °F
Reset point rP-10...99.3 °C: 14...210.8 °F
Frequency end point, FEP12...100 °C: 53.6...212 °F
In steps of0.1 °C: 0.2 °F
Frequency at the end point FRP [Hz]10...10000
In steps of [Hz]10
Measuring dynamics1:50
Frequency start point, FSP-10...78 °C: 14...172.4 °F
Accuracy (in the measuring range)± 5 % MEW; (Q > 1 l/min; 20...70 °C Medium temperature)
Repeatability± 1 % MEW
Temperature drift0,029 °C / K
Accuracy [K]3 K (25°C; Q > 1 l/min)
Время отклика0.01
Damping process value dAP [s]0...5
In steps of [s]0.1
Damping for the analog output dAA [s]0...5
Dynamic response T05 / T09 [s]T09 = 120 (Q > 1 l/min)
Parameter setting optionshysteresis / window; normally open / closed; switching logic; current/frequency output; damping for the switching output / analog output; display can be rotated and switched off; standard unit of measurement; process value color; calibration factor
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9 CDV
ProfilesSmart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis
SIO modeyes
Required master port classA
Process data analog2
Process data binary2
Min. process cycle time [ms]3.2
Supported DeviceIDsType of operation: DeviceID; default: 1043
Рабочая температура0...60
Рабочая температураmedium temperature < 80 °C; medium temperature < 100 °C: 0...40 °C
Storage temperature [°C]-15...80
ProtectionIP 65; IP 67
EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27: 20 g (11 ms)
Vibration resistanceDIN EN 60068-2-6: 5 g (10...2000 Hz)
MTTF [years]170
UL approvalUL approval number: I006; File number UL: E174189
Pressure equipment directivesound engineering practice
Масса1608.6
Материалstainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC; brass chemically nickel-plated
Материалstainless steel (1.4401 / 316); stainless steel (1.4404 / 316L); brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
Switching cycles mechanical10 million
DisplayDisplay unit: 6 x LED, green; Switching status: 2 x LED, yellow; Measured values: alphanumeric display, red/green alternating indication 4-digit; Programming: alphanumeric display, 4-digit
RemarksUse of 200 micron filtration is recommended.; All data refer to oil with the following nominal viscosity: 320 mm²/s, 40 °C; MW = Measured value; MEW = Final value of the measuring range
Pack quantity1 pcs.
Connector1 x M12; coding: A; Contacts: 4, gold-plated
Получить предложение по этой позиции