ifm electronic gmbh SI5007
Flow monitor, SID10ADBFPKG/US-100
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 2 |
|---|---|
| Process connection | threaded connection M18 x 1,5 Internal thread |
| Media | Liquids; Gases |
| Medium temperature [°C] | -25...80 |
| Pressure rating | 300 bar: 30 MPa |
| Напряжение питания | 18...36 DC |
| Current consumption [mA] | < 60 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 10 |
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Напряжение питания | 2.5 |
| Permanent current rating of switching output DC [mA] | 250 |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Probe length L [mm] | 45 |
| Setting range [cm/s] | 200...3000 |
| Greatest sensitivity [cm/s] | 200...800 |
| Measuring range [°C] | 2...80 |
| Resolution [°C] | 1 |
| Repeatability [cm/s] | 1...5 |
| Note on repeatability | for water 5...100 cm/s; 25 °C; Factory setting |
| Temperature drift [cm/s x 1/K] | 0.1; (for water 5...100 cm/s; 10...70 °C) |
| Max. temperature gradient of medium [K/min] | 300 |
| Switch point accuracy [cm/s] | ± 2...± 10; (for water 5...100 cm/s; 25 °C; Factory setting) |
| Hysteresis [cm/s] | 2...5; (for water 5...100 cm/s; 25 °C; Factory setting) |
| Switch point accuracy [K] | ± 3 (v > 5cm/s); (Liquids) |
| Resolution [K] | 1 |
| Hysteresis [K] | 2 |
| Repeatability [K] | 2 |
| Время отклика | 1...10 |
| Adjustment of the switch point | pushbuttons |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 2 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 3 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 53 |
| Рабочая температура | -25...80 |
| Storage temperature [°C] | -25...100 |
| Protection | IP 65; IP 67 |
| EMC | DIN EN 60947-5-9 |
| Shock resistance | DIN IEC 60068-2-27: 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6: 20 g (55...2000 Hz) |
| MTTF [years] | 277 |
| Масса | 231.5 |
| Housing | tubular |
| Dimensions [mm] | Ø 50 / L = 113 |
| Материал | stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X |
| Материал | stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A |
| Probe diameter [mm] | 8.2 |
| Installation length EL [mm] | 45 |
| Display | Function: 10 x LED, three-color |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4 |