ifm electronic gmbh SM7100
Magnetic-inductive flow meter, SMR34GGXFRKG/US-100
Категории:
Технические характеристики
| Number of inputs and outputs | Number of digital outputs: 2; Number of analog outputs: 1 |
|---|---|
| Measuring range | 0.2...50 l/min: 0.01...3 m³/h |
| Process connection | threaded connection G 3/4 external thread DN20 flat seal |
| Special feature | gold-plated contacts |
| Application | Totalizer function; for industrial applications |
| Installation | connection to pipe by means of an adapter |
| Media | Conductive liquids; water; water-based media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature [°C] | -10...70 |
| Pressure rating | 16 bar: 1.6 MPa |
| MAWP (for applications according to CRN) | 10.4 bar: 1.04 MPa |
| Напряжение питания | 18...30 DC; (to SELV/PELV) |
| Current consumption [mA] | 95; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 5 |
| Measuring principle | magnetic-inductive |
| Inputs | counter reset |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; pulse signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / closed; (configurable) |
| Напряжение питания | 2 |
| Permanent current rating of switching output DC [mA] | 200 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4...20; (scalable) |
| Max. load [Ω] | 500 |
| Напряжение питания | 0...10; (scalable) |
| Min. load resistance [Ω] | 2000 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | yes (non-latching) |
| Overload protection | yes |
| Display range | -60...60 l/min: -3.6...3.6 m³/h |
| Resolution | 0.1 l/min: 0.001 m³/h |
| Set point SP | 0.5...50 l/min: 0.027...3 m³/h |
| Reset point rP | 0.2...49.8 l/min: 0.012...2.985 m³/h |
| Analog start point ASP | 0...40 l/min: 0...2.4 m³/h |
| Analog end point AEP | 10...50 l/min: 0.6...3 m³/h |
| In steps of | 0.1 l/min: 0.001 m³/h |
| Pulse value | 0.00001...50 000 m³ |
| Pulse length [s] | 0,005...2 |
| Measuring range [°C] | -20...80 |
| Resolution [°C] | 0.2 |
| Set point SP [°C] | -19.2...80 |
| Reset point rP [°C] | -19.6...79.6 |
| Analog start point [°C] | -20...60 |
| Analog end point [°C] | 0...80 |
| In steps of [°C] | 0.2 |
| Accuracy (in the measuring range) | ± (0,8 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2% MEW |
| Accuracy [K] | ± 2,5 (Q > 5 l/min) |
| Время отклика | 0.15; (dAP = 0, T19) |
| Delay time programmable dS, dr [s] | 0...50 |
| Damping process value dAP [s] | 0...5 |
| Dynamic response T05 / T09 [s] | T09 = 20 (Q > 5 l/min) |
| Parameter setting options | Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / closed; switching logic; current/voltage/pulse output; Start-up delay; display can be deactivated; Display unit |
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
| SIO mode | yes |
| Required master port class | A |
| Process data analog | 3 |
| Process data binary | 2 |
| Min. process cycle time [ms] | 5 |
| Supported DeviceIDs | Type of operation: DeviceID; default: 572 |
| Рабочая температура | -10...60 |
| Storage temperature [°C] | -25...80 |
| Protection | IP 67 |
| EMC | DIN EN 60947-5-9 |
| CPA approval | model number: 001MI; accuracy class: -; maximum allowable error: ± 1,5 % FS; Q (min): 0,01 m³/h; Q (t): -; Q (max): 3 m³/h |
| Shock resistance | DIN IEC 68-2-27: 20 g (11 ms) |
| Vibration resistance | DIN IEC 68-2-6: 5 g (10...2000 Hz) |
| MTTF [years] | 145 |
| Pressure equipment directive | sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Масса | 586.5 |
| Housing | tubular |
| Inlet pipe length | 3 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions [mm] | Ø 54 / L = 110 |
| Материал | stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE |
| Материал | stainless steel (1.4404 / 316L); PEEK; EPDM |
| Display | Display unit: 6 x LED, green (l/min, m³/h, l, m³, 10³, °C); Switching status: 2 x LED, yellow; Measured values: alphanumeric display, 4-digit; Programming: alphanumeric display, 4-digit |
| Remarks | MW = Measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
| Connector | 1 x M12; coding: A; Contacts: 4, gold-plated |